GQ Patrol project/Parts

[nz4x4]

Selling my GQ winch truck project. Will sell complete or as parts.

It is on trademe, ignore the price. Just make me offers

http://www.trademe.co.nz/Browse/Listing.aspx?id=826304584



SWB Nissan GQ Body - Chopped, blasted and etch primed. Needs new front radiator support panel and a couple of rust repairs to firewall (Easy to do now it has been blasted - I was going to chop front off and tube the front end) Inner guards have been chopped to allow for suspension. All mounting brackets for dash have been removed (I was going to run a custom aluminium dash)

SWB Nissan GQ chassis - all suspension mounts removed, new front suspension 90% finished (Just needs new panhard mont fabricating). Rear of chassis shortened and rollcage mounts welded in.

6x 12" 2.5"Body FOA remote reservoir coilovers - the seals are currently weeping a little oil due to no pressure in shocks (I depressurised them so they could be cycled for fabrication) - Just need re seating when shocks are valved.

2x 4" 2.5" Body FOA Bump Stops (rear)

2x 4" 2" Body Fox Bump Stops (front)

2D Extreme Front radius arms

3rds Production Panhard Rods (front and rear)

Custom Flamin Fabrications Lower Rear and Adjustable Upper Rear trailing arms (to suit 104" wheelbase)

4wd Bits Billet front hubs

2x Complete GQ front & rear diffs (1 set in bits as it has been laminated/strengthened and had suspension mounts fabricated. (4.3 & 4.1 diff heads with LSD rears)

Front doors (Have some rust)

GQ 5 speed manual and transfer case

Marks adaptors engine conversion for 350 Chev

Steering Box

Handbrake assembly



I have rear suspension mounds fabricated ready to install on diff housings and on chassis.

[dawwen]

Interested in shocks and bumps. What price do you have in mind for them?

[nz4x4]

Please PM me for price questions

[nz4x4]

Anyone want the body and chassis? $50. Need the space