Mitsi 3.5 auto choke/idle stepper motor needed

[Smurf]

Auto choke/fast idle/idle stepper motor set up from mid 90s 3.5 litre Pajero required to keep the Sister in Law happy.

[NJV6]

Idle stepper motor? They get gunked up and can be cleaned easy enough with carb cleaner, they are mounted under the throttle body, I have had to clean mine before I put a catch can on it, it was idling a bit funny and stalling from memory.

[Smurf]

Idle stepper motor? They get gunked up and can be cleaned easy enough with carb cleaner, they are mounted under the throttle body, I have had to clean mine before I put a catch can on it, it was idling a bit funny and stalling from memory.

Glenn this one idles fast and has on and off for years, now is permanently idling around 2200 RPM. it has been cleaned out a few times but has issues still

[NJV6]

Oh right, it's really high! Good luck. I seem to recall the 3.0 ones being te same but can't confirm this.
Good luck.

[Team Tonka]

I'll have one somewhere, $40. Cheers Andy.

[Smurf]

I'll have one somewhere, $40. Cheers Andy.

PM sent. Cheers Andy

[nztimr33]

if the battery has gone flat or been disconnected mitsi need to relearn idle - just a fyi , dissconnect battery for 5 mins , put it back on and let it idle for 5-10mins with no load i.e air con , steering wheel straight , then drive it might be all it is - worth a try anyway