tuning 80 series

For all topics relating solely to diesel engines and modifications
Post Reply
hachi_roku
Hard Yaka
Posts: 281
Joined: Mon Jul 09, 2012 10:49 pm
Location: Hibiscus Coast , Auckland

tuning 80 series

Post by hachi_roku »

Is there someone in auckland that can actually tune a diesel 80 series, not just playing around with it a guessing... preferably tuning to AFR and egt, im not wanting all out power, just decent reliable tune.
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: tuning 80 series

Post by wopass »

i just played with mine , no AFR or EGT and its pretty good...only for the last 6? years so dont know about the reliability yet 8)

can't coment on Auckland tuners tho :mrgreen:
If you already know everything, DON'T ask bloody questions!!
Big
Hard Yaka
Posts: 2134
Joined: Thu Nov 03, 2005 12:00 pm
Location: central Otago
Contact:

Re: tuning 80 series

Post by Big »

Ive tuned mine to egt's as diesels either make power with fuel or don't.. also played with boost to 14.5psi give or take a little bit.. and I've just adjusted the main screw a wee bit and the other 2 screws as per previous posts or threads found round the net.. I get a puff of black when heavy exceleration then clears bewdy..Egt's are around 750 mark.. and goes well.. AFR tuning I think wouldn't yield that much of a difference if anything at all as you either burn it or don't so I just tried to make things nice and not high in egt.. was easy to do once egt gauge and boost gauge are in place.. not hard at all.. Could get into it more but this is basically what I have done.. Bear in mind.. my engine has only done 30k from rebuild and has front mount intercooler which is a great advantage..
User avatar
mudlva
Hard Yaka
Posts: 2918
Joined: Mon Apr 16, 2007 12:00 pm
Location: fixing another cv!! dam lockers (Papakura)

Re: tuning 80 series

Post by mudlva »

Turbo and diesel in penrose
or
doctor diesel in g.i.
heard good reports from both crowds
hachi_roku
Hard Yaka
Posts: 281
Joined: Mon Jul 09, 2012 10:49 pm
Location: Hibiscus Coast , Auckland

Re: tuning 80 series

Post by hachi_roku »

Yeh I'm just wanting someone that knows what they're doing... Not long after I brought my truck I removed turbo, injectors and pump and sent them to alltech to high flow turbo with billet wheel, new injectors and pump rebuild to suit turbo ( well that what I asked for ) and I got factory setting plus 5% apparently... And a half arsed main fuel screw turn to get me sorted which after spending 3k with them on just parts alone I did all the labour, I was expecting more... Still can't run too much boost as it starts taking fuel out over 15psi, so just wanting someone to tune it properly, I'm not expecting a weapon ( that's why I'm building a safari haha, just good reliable power)

I've already done intercooler, part time kit, 3" exhaust off the turbo, water meth injection... So Ive built it to be reliable,
Lchundy
Hard Yaka
Posts: 415
Joined: Mon Jul 26, 2010 9:45 pm

Re: tuning 80 series

Post by Lchundy »

So what did the say they spec is on your turbo?I know of 2 80s with just standard turbo upgraded/intercoooler/exhaust that make real good power reliably with pump tweaked only slightly.
hachi_roku
Hard Yaka
Posts: 281
Joined: Mon Jul 09, 2012 10:49 pm
Location: Hibiscus Coast , Auckland

Re: tuning 80 series

Post by hachi_roku »

yeh i have the spec sheet at work.... seems to be the normal upgrade every one does.
Post Reply

Return to “Diesel Engines and Modifications”