WD21 front diff mount bushes

johnny262 · Post by **johnny262** » Thu Sep 10, 2015 5:03 pm

Any chance someone's got some measurements for the above bushes - r180a

Trying to source some eccentric bushes to drop the front diff

Cheers

BlakeNZ · Post by **BlakeNZ** » Thu Sep 10, 2015 6:28 pm

import them?
https://ruggedrocksoffroad.com/front-di ... -4157.html

stovanovich · Post by **stovanovich** » Thu Sep 10, 2015 7:41 pm

BlakeNZ wrote:import them?
https://ruggedrocksoffroad.com/front-di ... -4157.html

Only problem there is the excessive shipping cost, I've been looking to this myself so I can swap my r180 for an r200

Crash bandicoot · Post by **Crash bandicoot** » Thu Sep 10, 2015 8:49 pm

i just measured the clearances between the drive shaft flanges and the torsion rods then unbolted the two mounts and cut out about 20mm and welded them back together.

johnny262 · Post by **johnny262** » Tue Sep 15, 2015 5:57 pm

BlakeNZ wrote:import them?
https://ruggedrocksoffroad.com/front-di ... -4157.html

Cheers mate, couldnt find the link for some dyslexic reason. Bit the bullet and forked out $160 they're on their way now

WD21 front diff mount bushes

WD21 front diff mount bushes

Re: WD21 front diff mount bushes

Re: WD21 front diff mount bushes

Re: WD21 front diff mount bushes

Re: WD21 front diff mount bushes