3rd-4th october 2015

[mudsurfv6]

only half of an achievement.

starting fitting a KZJ78 electric locking diff head into a KZJ95 rear diff housing. but need an e locker gasket as a template for where I have to drill new holes and cut some housing away.

so will finish another day.

[kbushnz]

You will need to do some cutting and also weld a new land for one of the holes. I used the new diff and a long drill to drill and then tap a new hole.

[mudsurfv6]

You will need to do some cutting and also weld a new land for one of the holes

yeah, i'll use the gasket to mark the right place to cut.

I used the new diff and a long drill to drill and then tap a new hole.

my drill bits aren't long enough, but with the gasket I can get holes in right place.

that's the plan anyway....