On the look out for either a good or a buggered unit. Mine is toast so wanting a good one o replace it.
OR, a stuffed unit to chop up and convert to a cable operation.
Prado rear E Locker actuator wanted
Re: Prado rear E Locker actuator wanted
Good luck they are pretty rare....
I plan to go air operated when mine packs up.... some info on the net about it.... Mainly for the 80 series and tacoma's in the states.
I plan to go air operated when mine packs up.... some info on the net about it.... Mainly for the 80 series and tacoma's in the states.
Cheers Calvin
KZJ78 Landcruiser Prado...
KZJ78 Landcruiser Prado...
Re: Prado rear E Locker actuator wanted
Do you have any good links, I need to do this to mine.
Matt
Matt
Re: Prado rear E Locker actuator wanted
Was going to try something like this...luxtoy wrote:Do you have any good links, I need to do this to mine.
Matt
http://www.pirate4x4.com/forum/toyota-t ... rsion.html
But have the actuator directly drive the shaft... not via rods...
Like this
http://forum.difflock.com/viewtopic.php?t=67105

Cheers Calvin
KZJ78 Landcruiser Prado...
KZJ78 Landcruiser Prado...
Re: Prado rear E Locker actuator wanted
I was looking to use a second hand brake lever or a quad bike hand brake with a lock out to run mine as a cable locker.
I don't have a suitable air source to run an air ram.
I don't have a suitable air source to run an air ram.
Re: Prado rear E Locker actuator wanted
I was given one of these...

Should do the trick.....
Calvin

Should do the trick.....
Calvin
Cheers Calvin
KZJ78 Landcruiser Prado...
KZJ78 Landcruiser Prado...
Re: Prado rear E Locker actuator wanted
Send it down to me?kbushnz wrote:I was given one of these...
Should do the trick.....
Calvin
It would do the trick.

Re: Prado rear E Locker actuator wanted
cheers matejuz wrote:Pmd ya Smurf