Airflow snorkel

paj94 · Post by **paj94** » Thu Apr 07, 2005 11:19 am

Is anyone fit Airflow bland snorkel (S47) on your Gen II pajero?
Any pic available on the pajero?

I saw the airtech one safari, but not the airflow brand on pajero.

NJV6 · Post by **NJV6** » Thu Apr 07, 2005 6:12 pm

I have seen one but not got one myself - there is a guy on here with one, goes by the name Padero, not sure what brand it is thou.

paj94 · Post by **paj94** » Thu Apr 07, 2005 6:39 pm

I see his pic and I'm pretty sure it is the Airtech brand from TJM.

ribbittuk · Post by **ribbittuk** » Wed Apr 13, 2005 8:04 am

Hiya,
I have a gen 2 Pajero, 7 seater and went around everywhere before Easter to find a snorkel to fit. Was told a Landcruiser L82 fits but the hose you get is 400mm and you need 900mm. They got me the right hose for no extra charge. They are easy to fit, it was a first time to fit one for us and we managed it fine. Should be a piccy of it in my album i think.

paj94 · Post by **paj94** » Wed Apr 13, 2005 8:18 am

ribbittuk,

It looks good and thanks for info for hose.

Now tim eto negothiate withmy play money. So I can get snorkel and tools. :wink:

Zukin · Post by **Zukin** » Wed Apr 13, 2005 9:37 am

I have one on my Pajero, it is pretty good.
I had to modify it a little for it to fit (remove a washer reservoir) and I heated it up to better fit the pillar

See it here

wazzawiseman · Post by **wazzawiseman** » Fri Jun 03, 2005 4:43 pm

i put one in, no template, but not to hard to do

paj94 · Post by **paj94** » Sun Jun 05, 2005 9:00 am

I'm still not decided whcih make I want.

AirFlow is attarctive from it's price.

TJM's price start $435 and I have no reply from ARB.
Miti said last time they fit ARB, it was around $800 (include fitting).

As I can see the pic from Zikkin and others, I notice that I need to remove water reserver for headlight washer like Zukkin said.

Anyway thanks wazzawiseman.
It's good to know it is easy to fit.

wazzawiseman · Post by **wazzawiseman** » Sun Jun 05, 2005 2:13 pm

I brought mine from http://www.Genie4x4.com (nz coampny) they seemed to be the cheapest around...if you want to check out the airflow snokel on a paj check out my website, main page shows it on the vehicle...dont know it website is listed in my profile or not so here it is....http://www.wicked.net.nz/WAZZA/WazzasWicked.htm

paj94 · Post by **paj94** » Sun Jun 05, 2005 6:52 pm

Thanks and Nice ride wazzawiseman!

Looks like I need to remove headlight washer reserver.
I will think about little bit more, while saving my toy money for that. :wink:

wazzawiseman · Post by **wazzawiseman** » Sun Jun 05, 2005 7:21 pm

yes you need to remove headlight washer reserver. to get it out you take off the wheel lining above drivers side front wheel, it has a couple of bolts inside the engine bay that you remove and then you need to pull forwards and downwards...go like crazy to rip it out,

paj94 · Post by **paj94** » Sun Jun 05, 2005 8:30 pm

Thanks for that,
I did repir that waher other day so I know what it like.

I'm also looking the other option if it will able to keep that waher intact.
Well, if the price is right, of course.
TJM and Safari looks like fit this needs (not confirmed), if I see the pics.

Cheers

padero · Post by **padero** » Sun Jun 05, 2005 8:50 pm

hi, i got a airtech snorkel, on my pajero. cost me $500 fitted it my self in a day piss easy nothing was removed apart from the old air in take. i haven't any problems with it so far and i think it's one of the better looking models around.

just make sure you have have the right size hold saw to do the job makes it alot easier trust me lol been there done it

ad

worzel · Post by **worzel** » Tue Jun 06, 2006 7:29 pm

they do fit ok air pipe to air box a bit of a mission but managed in end took about 3 hours to do it all

got pics of finish job in photo album/user pics page 16

worzel

worzel · Post by **worzel** » Tue Jun 06, 2006 7:31 pm

airlow was cheapest got mine through work but normal cost about $295

Airflow snorkel

Airflow snorkel

Airflow snorkle

By the way