Sound proofing, opinions/experiences

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
User avatar
wjw
Hard Yaka
Posts: 3420
Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:

Sound proofing, opinions/experiences

Post by wjw »

Due to the amount of time I spend in rivers, I took the carpet out of the 80, which of course has made the cabin quite noisy on the road.

Is it worth installing this stuff?

http://restosupplies.co.nz/index.php?ro ... uct_id=403

Does it need carpet on top to protect it?

If so, would I be better off buying something like this:

http://www.ebay.com/itm/MOULDED-CAR-CAR ... pH&vxp=mtr

Using marine carpet, or buying mats:

http://www.ebay.com/itm/TO-FIT-Toyota-L ... hV&vxp=mtr

TIA

Bill
-----------------------
Who knew Prados could fly?
MihiT
Hard Yaka
Posts: 358
Joined: Sun Feb 08, 2015 12:33 pm
Location: RD8

Re: Sound proofing, opinions/experiences

Post by MihiT »

I looked into this a while ago but shelved it.

There is a 2 pack rubberised paint (at about $100/lt) which is supposed to be the biz.

Marine carpet isn't very sound-absorbent.

Mass is your friend for sound deadening, there is some ashphalt-backed flashing tape available which would be tedious, but effective, the manufacturer may do sheets?
- 1990 LWB Safari flatdeck, TD42 -
- 1988 LWB 7-seat Safari, TD42 -
1989 LWB 5-Seat TD42
MihiT
Hard Yaka
Posts: 358
Joined: Sun Feb 08, 2015 12:33 pm
Location: RD8

Re: Sound proofing, opinions/experiences

Post by MihiT »

Sorry, I see that first link now. if you weren't painting it on, that stuff looks good.
- 1990 LWB Safari flatdeck, TD42 -
- 1988 LWB 7-seat Safari, TD42 -
1989 LWB 5-Seat TD42
Pj_Marsh
Hard Yaka
Posts: 193
Joined: Mon Feb 20, 2012 5:46 pm

Re: Sound proofing, opinions/experiences

Post by Pj_Marsh »

I went to a place called Pararubber in palmy, they sold me rolls of high density foam for $10 a meter of offcuts. It's about 5mm thick and is pretty decent. Just urathaned it to the surface and she's insulated sound and heat.
User avatar
wjw
Hard Yaka
Posts: 3420
Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:

Re: Sound proofing, opinions/experiences

Post by wjw »

Pj_Marsh wrote:I went to a place called Pararubber in palmy, they sold me rolls of high density foam for $10 a meter of offcuts. It's about 5mm thick and is pretty decent. Just urathaned it to the surface and she's insulated sound and heat.
We have one of those here, I'll go see them.
-----------------------
Who knew Prados could fly?
Post Reply

Return to “Tool Shed”