Tranfer lever mods when body lifting?

[JohnySWB]

I have a 91 shorty that I have body lifted to 45mm above normal.
I then found it won't go into 2wd. After taking the plastic console off around the gear levers I found the transfer lever fouling on the body slightly so I have managed to fix that but now I find that the plastic console fouls it.

So the question is how to fix this problem, I have noticed that the levers them selves flair out to about 25-30mm diameter looking like they have a rubber insert or something inside to cushion shifting. Can this lever can be taken off the lever that is attached to the box itself.I figured I could replace the fat boy lever with a thinner one so as not to foul console.

Any help on how others have solved this problem greatly appreciated.

Cheers John

[red-devil]

when i did my 50mm life i was having troble getting 4lowloc as well.

my fix was cut a small amount of the body around were the lever was making contact.

hav all gears and still very little water coming through the seal