Wanted: LN130 Surf Rear Lift Springs/Coil Spacers

smurf182 · Post by **smurf182** » Tue Feb 06, 2007 6:22 pm

Hi all,

I'm after a pair of lifting springs or coil spacers for the rear of my 91 Surf. 2 inches of lift would be ideal however I will consider all offers.

Cheers

DEATH_INC · Post by **DEATH_INC** » Thu Feb 08, 2007 2:10 pm

Have you looked around at new stuff?
If you've not had any luck I can sort something for ya.

warlord225 · Post by **warlord225** » Thu Feb 08, 2007 7:21 pm

ring george stocks and co, they sell new stuff only though

DEATH_INC · Post by **DEATH_INC** » Thu Feb 08, 2007 8:34 pm

Stocks don't do anything that height, but I can get Cobra springs from chamberlains in chch, and they'll custom build stuff.

wjw · Post by **wjw** » Thu Feb 08, 2007 8:48 pm

they'll be available from chamberlains off the shelf.

worzel · Post by **worzel** » Fri Feb 09, 2007 8:33 am

80 series cruiser springs and shocks fit and give between 50-75mm lift you will just have to measure them as there are different lengths ideal length is no more than 75mm longer than original length and you will have to put a longer brake flexi pipe on as original is to short with new springs

have just done this to mine

give Nigel a ring at Just Cruisers

http://www.offroadexpress.co.nz/images/ ... .thumb.jpg

Kev

Leithfield · Post by **Leithfield** » Fri Feb 09, 2007 5:20 pm

Have a set of mint 80 Series Cruiser springs sitting in my garage as I type Smurf182 (dating back to the days when I ran an 80 series and pulled the factory coils to fit taller); if you're in Canterbury and interested drop me a PM.

smurf182 · Post by **smurf182** » Fri Feb 09, 2007 7:39 pm

Cheers for the offer of the 80 series springs but I don't want more than 2-2.5" of lift, reason being 2" is about the limit for a IFS torsion bar windup and I don't want to buy new shocks at this time.

Thanks anyway