Toyota Spares - How do I avoid getting ripped off ?

New to the site? Introduce yourself, tell us what 4wd(s) you have or your new to 4wding. Ask questions look for tips and hints in here.
Post Reply

Where is the best place to get parts etc

Poll ended at Sat Mar 03, 2007 8:54 pm

The local dealer
4
50%
Repco
0
No votes
Supercheep
0
No votes
Some place else
4
50%
 
Total votes: 8

User avatar
dazza85
Hard Yaka
Posts: 938
Joined: Tue Jan 03, 2006 12:00 pm
Location: Hastings

Toyota Spares - How do I avoid getting ripped off ?

Post by dazza85 »

I went to the Toyota dealer and got a price for the power steering control seals and was told that these are a discontuned part that sells for around $400 but that there wae a set sitting at another branch that they may be able to get for me at around $100
They also qouted $70 for the heater blower resistor unit ( the bit that gives the slower speeds)

The power steering controler is weeping a bit and is also making some noise when the wheel is turned.
I was told that replacing the seals will fix this ...

Any help as to where to get parts at the best price would be appreacated
There is no mechanical problem so difficult that it cannot be solved by brute strength and ignorance.
User avatar
tallsam66
Hard Yaka
Posts: 1851
Joined: Sat Jul 01, 2006 12:00 pm
Location: Christchurch

Post by tallsam66 »

Hi
I just phone around & get a few prices from different places.
You may be able to get the heater part from a car wrecker or an auto electrician might be able to get you one for a better place.
Let ya fingers do the walking.
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

as for seals, i was with h20 when he did his power steerin pump..

from memory he bought 'after market non factory type' seals.. it leaked albeit ever so slowly.. then he went and got some factory style seals/seal and its been spot on ever since..

i dont know what the difference may be, if any,but for me, for peace of mind i'd go toyota dealer.. in that circumstance inhoo.. :wink:

as they say, each to their own...

good luck..

:D
ImageImage
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

$102 for a rear transfer case seal for my Rugger from Toyota :oops: , the Toyota ones are the best apparantly as they are made with the correct lips etc....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
kaney
Hard Yaka
Posts: 1060
Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch

Post by kaney »

Jerry wrote:$102 for a rear transfer case seal for my Rugger from Toyota :oops: , the Toyota ones are the best apparantly as they are made with the correct lips etc....



the random number generator cant have worked in your favour, cause i just got one from toyota for my prado and it was $37.80 :P and i was thinking they saw me coming
toymota thats stock standard.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

If you like that price they quoted me $1500 for a new starter motor !!!!!
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Baldrick
Hard Yaka
Posts: 143
Joined: Thu Jan 02, 2003 12:00 pm
Location: Wellington District

Re: Toyota Spares - How do I avoid getting ripped off ?

Post by Baldrick »

dazza85 wrote:I went to the Toyota dealer and got a price for the power steering ...

Any help as to where to get parts at the best price would be appreacated


You could try giving Just Cruisers a call in Ch-CH - aka Lineside Auto - on 0800 444 589
Baldrick
91 Cruiser VX Ltd Auto Diesel Turbo *Safari snorkel * 80mm RAW suspension lift * Custom Bull-bar * 33" MT tyres * 26Mhz & UHF CB units * West Coast Rust * And a partridge in a pear tree! Oh... and an awesome new Co-Pilot :mrgreen:
User avatar
tallsam66
Hard Yaka
Posts: 1851
Joined: Sat Jul 01, 2006 12:00 pm
Location: Christchurch

Post by tallsam66 »

Beware of Lineside Auto.
Yes they do a good range of stuff but you sure pay for it...they are the most expensive wrecker in chch.
I recently needed to replace the bash plate on my 94 Hilux Surf.....
they were going to charge me $95 + GST = $106.88
I rang around & got one for $60 including GST from Falsgrave Auto.
sooo be careful.
adventures_more
Hard Yaka
Posts: 275
Joined: Sun Dec 31, 2006 12:00 pm

Post by adventures_more »

i reckn tyrademe & ebay are great , heaps of 4x4 dealers on there selling their stuff online , sometimes buy from the states or Aussie as stuff is really chep there
gomulletgo
Hard Yaka
Posts: 320
Joined: Sat Aug 26, 2006 12:00 pm
Location: Amberley / North Canterbury

Post by gomulletgo »

they were going to charge me $95 + GST = $106.88
I rang around & got one for $60 including GST from Falsgrave Auto.
sooo be careful.


Bashplate? If that got shagged mate chances are it will probably do it again........You did'nt consider fabbing up a tougher one your self? :D
User avatar
MudBum
Hard Yaka
Posts: 244
Joined: Wed Jul 26, 2006 12:00 pm
Location: North Canterbury
Contact:

Post by MudBum »

niblik wrote:as for seals, i was with h20 when he did his power steerin pump..

from memory he bought 'after market non factory type' seals.. it leaked albeit ever so slowly.. then he went and got some factory style seals/seal and its been spot on ever since..

i dont know what the difference may be, if any,but for me, for peace of mind i'd go toyota dealer.. in that circumstance inhoo.. :wink:

as they say, each to their own...

good luck..

:D


Im with Nibby on this,with seals Factory is the only way to go.
***Prior Preparation Prevents Piss Poor Performance***

Most sports require only one ball - real sports require two.
User avatar
tallsam66
Hard Yaka
Posts: 1851
Joined: Sat Jul 01, 2006 12:00 pm
Location: Christchurch

Post by tallsam66 »

gomulletgo wrote:
they were going to charge me $95 + GST = $106.88
I rang around & got one for $60 including GST from Falsgrave Auto.
sooo be careful.


Bashplate? If that got shagged mate chances are it will probably do it again........You did'nt consider fabbing up a tougher one your self? :D


I didnt damage it.A previous owner cut some huge bits off it exposing the bottom corners of the radiator to fit a bullbar.
Im in the process of removing the bullbar so i can fit an new bumper with a winch in it.
User avatar
crewzer
Winch master
Posts: 10
Joined: Sat May 27, 2006 12:00 pm

Post by crewzer »

What about $3500 for a replacement radiator for a 94 prado! Took it in this morn for a clean at best, recore at worst. 60% blocked, and no cores or radiators in the country apart from the $3500 toyota!
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

Some places parallel import them...there is a place in Welly that does if you want me to ask...
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
crewzer
Winch master
Posts: 10
Joined: Sat May 27, 2006 12:00 pm

Post by crewzer »

that'd be great thanks. 94 Prado KZJ78 - 1KZ-TE.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

Actually......they have the email thingy abelsmith@xtra.co.nz , their ad says "Parallel Imported Radiators", as an option what about one from a wrecker?, may need a clean and be ok? their phone is 04 385 0580 (Abel Smith Radiators)....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
hiriklux
Hard Yaka
Posts: 559
Joined: Wed Apr 06, 2005 12:00 pm
Location: Amberley

Post by hiriklux »

Beware of Lineside Auto.
Yes they do a good range of stuff but you sure pay for it...they are the most expensive wrecker in chch.


i gotta disagree they aint that pricey when you use them regular and i do and theyve always got the part very rare if they dont

cheers rik
User avatar
Rollux
Bush Crasher
Posts: 87
Joined: Sun Dec 24, 2006 12:00 pm
Location: Christchurch

Post by Rollux »

All the prices i've had from Toyota for my LN61 were very reasonable, esp compared to Nissan stuff! Plus getting 35% off for trade is a bonus
1989 LN61 Hilux Surf
K&N Filter
Skyline Intercooler
2.5" Exhaust from Turbo
Post Reply

Return to “New Members and Beginners”