WANTED NISSAN DIFFS OR TOYOTA

mroffroader · Post by **mroffroader** » Tue Mar 13, 2007 7:01 pm

Hey guys

any one have or know of any nissan safari front diffs (need a complete one) and need a 80 series rear diff (complete) there for the rover :twisted:

MUST BE CHEAP :lol:

doddzee · Post by **doddzee** » Tue Mar 13, 2007 7:27 pm

Why not use nissan or 80 series front and rear? Why the mix n match?

turoa · Post by **turoa** » Tue Mar 13, 2007 7:30 pm

doddzee wrote:Why not use nissan or 80 series front and rear? Why the mix n match?

Nissan front will bolt in. You just need to make a hybrid panhard, and get a draglink made

Nissan rear wont line up to teh transfercase

doddzee · Post by **doddzee** » Tue Mar 13, 2007 7:36 pm

turoa wrote:Nissan front will bolt in. You just need to make a hybrid panhard, and get a draglink made

Nissan rear wont line up to teh transfercase

Good enough Reason i spose

mroffroader · Post by **mroffroader** » Tue Mar 13, 2007 7:38 pm

doddzee wrote:
turoa wrote:Nissan front will bolt in. You just need to make a hybrid panhard, and get a draglink made

Nissan rear wont line up to teh transfercase

Good enough Reason i spose

may also consider the option of cruizer centers......so does anyone have some 40 rear diffs? need two......that is another option and get brian howat to make me some coustom axles

DaveM · Post by **DaveM** » Tue Mar 13, 2007 7:50 pm

hmmm, Nissan mixed with Land Rover mixed with Toyota = Tossan Rover

Mitchellman · Post by **Mitchellman** » Wed Mar 14, 2007 3:48 pm

I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

mroffroader · Post by **mroffroader** » Wed Mar 14, 2007 4:22 pm

Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much :lol:

Ryan · Post by **Ryan** » Wed Mar 14, 2007 4:23 pm

what a cheeky prick askin 4 toyota stuff with that avatar?? :twisted:

mroffroader · Post by **mroffroader** » Wed Mar 14, 2007 4:25 pm

Ryan wrote:what a cheeky prick askin 4 toyota stuff with that avatar??

Dak · Post by **Dak** » Wed Mar 14, 2007 6:32 pm

See, I told ya ya just need to buy a Safari to start with :twisted:

Cloggy_NZ · Post by **Cloggy_NZ** » Wed Mar 14, 2007 7:35 pm

mroffroader wrote:may also consider the option of cruizer centers......so does anyone have some 40 rear diffs? need two......that is another option and get brian howat to make me some coustom axles

I've got a 40 rear diff here, complete drum to drum. Two problems with these diffs in a Disco though, too narrow if you just want to bolt it in as is, the diff centre itself is too large if you want to fit it inside your LR housing. You'll need the 8" Hilux type heads. According to Howatt, 2 pinion only marginally stronger than LR Banjo (i.e. you or I will break it), 4 pinion the way to go, but even then he re-inforced the bearing caps on the ones in his RR as the carrier bearings are apparently a little on the small side.
Go the the Nissan GQ front and Land Cruiser 80 rear (or Salisbury rear and 4 pinion Hilux in the front)

turoa · Post by **turoa** » Wed Mar 14, 2007 7:39 pm

No no cloggy, we are talking slicing the 2 housings in 2, and putting the cruiser housing diff holder thingymajig onto the LR housing. The guy who had a bobtailed rangerover at one of the rallywoods trips we did had done this.

Cloggy_NZ · Post by **Cloggy_NZ** » Wed Mar 14, 2007 7:42 pm

That would work. Did this many years ago in my HQ, put a Ford 9" head mated to the HQ axles. Worked a treat as axles etc where the right size and spline.

Also have a 40 complete front axle here Mr O, the head is a little rusty though but some of Pedro's magical rust remover might fix this.
I was going to run these in my Series 1.

mroffroader · Post by **mroffroader** » Wed Mar 14, 2007 7:46 pm

Cloggy_NZ wrote:That would work. Did this many years ago in my HQ, put a Ford 9" head mated to the HQ axles. Worked a treat as axles etc where the right size and spline.

Also have a 40 complete front axle here Mr O, the head is a little rusty though but some of Pedro's magical rust remover might fix this.
I was going to run these in my Series 1.

how much i may be very keen

:D:D

turoa · Post by **turoa** » Wed Mar 14, 2007 7:47 pm

Whats gonna happen to the s1 body and cage etc?

Cloggy_NZ · Post by **Cloggy_NZ** » Wed Mar 14, 2007 9:28 pm

Mostly all gone. Sold, wrecked and given away. Just a few bits and pieces to go.

Mitchellman · Post by **Mitchellman** » Thu Mar 15, 2007 8:11 pm

mroffroader wrote:
Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much

Iam really new to this Diff is complete want $300.00

turoa · Post by **turoa** » Thu Mar 15, 2007 8:20 pm

Mitchellman wrote:
mroffroader wrote:
Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much

Iam really new to this Diff is complete want $300.00

What ratio is it?

mroffroader · Post by **mroffroader** » Thu Mar 15, 2007 8:22 pm

turoa wrote:
Mitchellman wrote:
mroffroader wrote:
Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much

Iam really new to this Diff is complete want $300.00

What ratio is it?

what he said :wink:

turoa · Post by **turoa** » Thu Mar 15, 2007 8:38 pm

Mitchellman wrote:
mroffroader wrote:
Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much

Iam really new to this Diff is complete want $300.00

You've got a PM in your inbox :wink:

mroffroader · Post by **mroffroader** » Thu Mar 15, 2007 8:41 pm

Mitchellman wrote:
mroffroader wrote:
Mitchellman wrote:I am wrecking a 1990 nissan grandroad Have front diff open to an reasonable offer

is it complete?? how much

Iam really new to this Diff is complete want $300.00

Il take it....where abouts are you? would you be able to ship to me in wellington? could you get a price maybe try main freight and ask for a depot to depot delivery. private message me with some details...

cheers