MISSILE ENGINE UPGRADE

SupraLux · Post by **SupraLux** » Thu Mar 22, 2007 2:56 pm

wopass wrote:small update

managed to get the Tcase and Gbox out tonight..... i had forgoten how heavy it was have a small dent in the concrete floor now

Last tmie I was forgetful like that I had a small dent in my chest

Steve

DieselBoy · Post by **DieselBoy** » Thu Mar 22, 2007 3:16 pm

SupraLux wrote:
wopass wrote:small update

managed to get the Tcase and Gbox out tonight..... i had forgoten how heavy it was have a small dent in the concrete floor now

Last tmie I was forgetful like that I had a small dent in my chest

Steve

Duuuuuude, i told ya to give me a text when ya were ready to drop it and i would come give you a hand :shock:

To hard for your own good :lol:

dixie · Post by **dixie** » Fri Mar 23, 2007 10:35 pm

DUDE!!!! ring me if ya need a hand with that shit,got most tools to make life a little easier....At this rate we be throwing shit around sooner than you think.

wopass · Post by **wopass** » Fri Mar 23, 2007 10:44 pm

DUUUDE ! ! YOU GOT A TATTOO !!....

ohh...wrong movie ?:roll:

yea righto, :lol:

am looking at removing the old donk maybe late next week if i can get clear of work and get all the stuff out of the way for its extraction.

let you know :wink:

dixie · Post by **dixie** » Fri Mar 23, 2007 11:07 pm

Ha Ha nice one Stiffler!!!!!!

Probably not much use to ya for the muscle but I could drink ya beer!!

wopass · Post by **wopass** » Fri Mar 23, 2007 11:08 pm

dixie wrote:Ha Ha nice one Stiffler!!!!!!

Probably not much use to ya for the muscle but I could drink ya beer!!

deal

nzhunter · Post by **nzhunter** » Sun Mar 25, 2007 4:34 pm

Probably not much use to ya for the muscle but I could drink ya beer!!

Haha yeah i can come give a hand to do that too lol. :lol:

Yeah even another offer if u need a bit of muscle just flick me a txt (mainly i wana learn this sorta sht) I gota a prty wickedly decent toolkit now too.

wopass · Post by **wopass** » Sun Mar 25, 2007 7:22 pm

more mess....

im hopeing to make sum good progress next weekend if i can get clear of work, maybe get the 2f out so will need some extra hands

dixie · Post by **dixie** » Sun Mar 25, 2007 7:31 pm

ring ring!!!

I see ya bidding on my B&M shifter,it was intended for your rig anyway

safari_mulisha · Post by **safari_mulisha** » Sun Mar 25, 2007 10:15 pm

you could use my portable engine hoist if you like...
its free next week end

warlord225 · Post by **warlord225** » Mon Mar 26, 2007 5:50 pm

that engine is cool, I hope your gunna leave it loud!!!

wopass · Post by **wopass** » Mon Mar 26, 2007 8:00 pm

warlord225 wrote:that engine is cool, I hope your gunna leave it loud!!!

loud ?... it will cmoe out of the headers into a 3" tube with a coballance pipe between the two then a muffler and out just behind the doors..so should make a nice rumble...might be loud'ish :wink:

wopass · Post by **wopass** » Mon Mar 26, 2007 8:02 pm

safari_mulisha wrote:you could use my portable engine hoist if you like...
its free next week end

whats the capacity of it mate ? needs to lift about a ton and about 1.5m up :shock:

thats getting the 2f out ... be much less getting the chev in :wink:

MATT4U · Post by **MATT4U** » Mon Mar 26, 2007 11:11 pm

cant wait to see this thing runnin a, you'll give mikes LR a run for noise a

Post by **mike** » Tue Mar 27, 2007 9:32 am

MATT4U wrote:cant wait to see this thing runnin a, you'll give mikes LR a run for noise a

mine will eat wopass's for breakfast :lol:

But I'm guessing his will be street legal, mine is far from it :cry:

Mike

wopass · Post by **wopass** » Tue Mar 27, 2007 10:44 pm

mike wrote:
MATT4U wrote:cant wait to see this thing runnin a, you'll give mikes LR a run for noise a

mine will eat wopass's for breakfast

But I'm guessing his will be street legal, mine is far from it

Mike

MATT4U · Post by **MATT4U** » Tue Mar 27, 2007 10:56 pm

wopass wrote:
mike wrote:
MATT4U wrote:cant wait to see this thing runnin a, you'll give mikes LR a run for noise a

mine will eat wopass's for breakfast

But I'm guessing his will be street legal, mine is far from it

Mike

everything is street legal till you get caught

gimmemud · Post by **gimmemud** » Wed Mar 28, 2007 12:20 am

hey ben what you doin with that nice power steering setup on the 2f :?:

safari_mulisha · Post by **safari_mulisha** » Wed Mar 28, 2007 2:46 am

2 ton.... i have lifted cars with it... very handy

i went up tomos today and smashed my drivers door in and broke a head light you know of any doors sitting around for swb safari?

wopass · Post by **wopass** » Wed Mar 28, 2007 12:38 pm

safari_mulisha wrote:2 ton.... i have lifted cars with it... very handy

i went up tomos today and smashed my drivers door in and broke a head light you know of any doors sitting around for swb safari?

sounds good mate, dont know of any safari bits floating round sorry.....

how big is this engine hoist of yours ? will it fit on a ute ? when can i grab it off you ? ... give me a bell or txt . my number is at the bottom of this post :wink:

wopass · Post by **wopass** » Wed Mar 28, 2007 12:39 pm

gimmemud wrote:hey ben what you doin with that nice power steering setup on the 2f

not sure what im going to do with it yet, it may sell on the motor or if i get a good offer for it i could sell seperate :wink:

safari_mulisha · Post by **safari_mulisha** » Thu Mar 29, 2007 6:07 am

im picking it up today around 5pm i can prob drop it off

wopass · Post by **wopass** » Thu Mar 29, 2007 10:04 am

safari_mulisha wrote:im picking it up today around 5pm i can prob drop it off

shoot me a txt dude and ill give you a bell :wink:

wopass · Post by **wopass** » Fri Mar 30, 2007 1:59 pm

well i had a spend up and bought a few bits and pieces for the chev to bolt on before it goes in the hole. no photos yet as my parts havent turned up yet :roll:

will get pics when i have them all bolted on and ready to go in

maybe this weekend the 2f will come out and the repair and mod work will begin before the chev gets dropped in the hole, that hopefully will happen easter weekend if i get arse into gear and do all the bits and pieces that need doing :roll:

wopass · Post by **wopass** » Sat Mar 31, 2007 4:53 pm

bit more......

empty hole :cry:

nearly ready to start the work i want to do before dropping the chev in.

safari_mulisha · Post by **safari_mulisha** » Sun Apr 01, 2007 1:55 pm

looks good... that hoist works a treat aye

wopass · Post by **wopass** » Sun Apr 01, 2007 8:10 pm

safari_mulisha wrote:looks good... that hoist works a treat aye

yea man, was awesum, cheers for the use of it dude, much appreciated. had it maxed tho getting the 2f out :wink:

wopass · Post by **wopass** » Sun Apr 01, 2007 9:17 pm

Ooohhh.....and if i keep the progress up and i get all my bits in time, i may have the chev in and running by the end of easter weekend after i come back from fishing

all things going to plan that is :roll:

then there will be a start up vid ! :twisted:

wopass · Post by **wopass** » Wed Apr 04, 2007 8:26 pm

bit more work on the missile tonight,got my new steering box semi in place to see where it all lines up and i think im gonna bolt it on there

had to do reinforcing and rust repairs on inner chassis while i was there so now the inner rail is 6mm plate right around the inner corner :twisted:

tgaguy1 · Post by **tgaguy1** » Wed Apr 04, 2007 9:32 pm

What is the sterring box out of Wopass?

MISSILE ENGINE UPGRADE

Re: ;-p

Re: ;-p

;-p

;-p

;-p