snorks

fish · Post by **fish** » Wed Mar 21, 2007 6:05 pm

where can i get a snorkel to fit a rocky no one makes them

does any one know what others can be made to fit a rocky(94)
cheers

2roky · Post by **2roky** » Wed Mar 21, 2007 6:34 pm

try TWL down here in dunedin if they have 1 it will cost you around $500 if not more.
the other option you have is buy a safari brand snorkle top/head and get an engineer to bend 1 up out of either stainless or mild steel all up will most probably set you back $300 odd at a guess. if you get 1 made dont pay any more than 300 tho and shop round get wirten quotes and use them as leverage against other engineers.

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 7:14 pm

Keep us informed... I am trying to find one for a daihatsu Feroza 1991.... not ahveing much luck yet either!

2roky · Post by **2roky** » Wed Mar 21, 2007 8:03 pm

nzdncjw
go n see cory round at pit stop he will bend you 1 up out of pipe for a resonable price you just have to buy the intake seperatly they look the part also

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 8:14 pm

Awesome thanks for that.... Will do that soon...

2roky · Post by **2roky** » Wed Mar 21, 2007 8:17 pm

go n throw a pic n a bit of info n da rigs shown tell section so we can see wot u done to your ride

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 8:31 pm

It is not acutally my truck.. my brother in laws... I have a 1980 FJ40.... anyway he has just joined the offroad express forum.... his user is 'hillman' I have posted some pics in the gallery of a wee play we had in the weekend.... Hopefully we will hear from him soon... he is in invercargil!

http://www.offroadexpress.co.nz/modules ... _album.php

the photos are on page 31 of the users gallery at the moment

there is a few old pics of my cruiser on about page 5 or 6

Chris

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 8:33 pm

where is the show n tell section? I havn't seen that one...

chris

worzel · Post by **worzel** » Wed Mar 21, 2007 8:35 pm

I think air flow make one thats fits i know they do one for a rugger

give me a ring at work 0800 444 589 ask for Kev will see what i can do for you if i can get one it will be $295 +gst can freight it free

Kev

2roky · Post by **2roky** » Wed Mar 21, 2007 8:52 pm

it the posting titled daihatsu rigs show n tell or something along those lines

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 10:13 pm

sweet thanks...

Jerry · Post by **Jerry** » Wed Mar 21, 2007 10:47 pm

I got one for my Rugger, the brand was Airflow, people sell em on Trademe....

PS did you put a similar post on the NZ4wd forum, I repied to a similar query there, let me know if you need more info

Jerry

nzdncjw · Post by **nzdncjw** » Wed Mar 21, 2007 10:54 pm

yeah I put a post to nz4wd as well... I check trade me too... thanks!

fish · Post by **fish** » Thu Mar 22, 2007 9:59 am

perfect, thanks boys i should be able to get it sorted now
cheers

nzdncjw · Post by **nzdncjw** » Thu Mar 22, 2007 4:30 pm

Found the guy on Trade me - he only has one for the Rugger... not Feroza, BUT they are both the same are they not so If I bought the one for the rugger the windscreen angle would be the same as the feroza? can anybody confirm or deny this... Thanks!

Jerry · Post by **Jerry** » Thu Mar 22, 2007 5:01 pm

I can measure mine if you want...what side is your airbox on, the rugger is a wee bit different to the feroza...

nzdncjw · Post by **nzdncjw** » Thu Mar 22, 2007 5:39 pm

the air box is kinda in the midle but the intake is behind the right head light looking towards the truck. so in theory the snorkle will be on the pasenger side.... I have a mate who offered to o bend one up for me just gotta supply the pipe - what pipe is best to use and what size do i need to fit the snorkel head properly?

2roky · Post by **2roky** » Thu Mar 22, 2007 5:55 pm

if ya dont mind me askin how much da 1 off trademe cost fish?
n da airbox and intake is all on the passenger side of the engine bay
as for pipe size nzdncjw u'd be best to go in get the head if thats the road your gona take then get the pipe to fit failing that find some1 with the same styled head and measure theirs as for the pipe for a cost you can get stainless steel that wont rust etc or for much cheaper you can get mild steel which will rust but can be painted to stop it

fish · Post by **fish** » Fri Apr 06, 2007 3:41 pm

well i decided to just make one i found some new 3 inch pipe {the bendy shit} 30 bucks a meter and the intake part for around 70. a lot cheeper than a bought one. now i just have to figuer out how to hook it up. and where to put the hole :shock:

any one done this whats the best way to do it one big hole saw or lots of little ones joined up.
cheers.

Aza · Post by **Aza** » Sun Apr 22, 2007 9:05 pm

Yea mine is a steel one autobend has a program set for rugger snorkles. . .

toymudlux · Post by **toymudlux** » Mon Apr 23, 2007 9:32 pm

what did autobend charge you for it??

Aza · Post by **Aza** » Wed Apr 25, 2007 5:48 pm

Ah dont know sorry but its just a phone call away . .