. - Offroad-Express

Jafa · Post by **Jafa** » Sun Mar 25, 2007 11:09 pm

Try a guy named csl3 on trade me

jumper · Post by **jumper** » Mon Mar 26, 2007 12:04 am

i think csl3 on trade me is warren baker,
cruiser spares ltd, tel:04 5262329 or mob: 027 453 0532
When i got a windscreen off him he had lots of swampers on the rack.

warlord225 · Post by **warlord225** » Mon Mar 26, 2007 6:33 am

you would be alright with them on a 7 inch rim

mroffroader · Post by **mroffroader** » Mon Mar 26, 2007 6:48 am

Ive got some 16" rims for a 413 on trademe if you need them......they have SAT's on them too! :wink:

http://www.trademe.co.nz/Browse/Listing ... d=93235679

mroffroader · Post by **mroffroader** » Mon Mar 26, 2007 6:56 am

or......

http://www.trademe.co.nz/Browse/Listing ... d=92176785

click that link that says

Ask the seller to relist or offer at a fixed price

and your away :wink:

u just gota find some rims :twisted:

callum007 · Post by **callum007** » Mon Mar 26, 2007 8:50 am

try calling specialty tyres in wanganui (i think thats were they are)
They are ex importer and still has small stocks...

DieselBoy · Post by **DieselBoy** » Mon Mar 26, 2007 11:09 am

warlord225 wrote:you would be alright with them on a 7 inch rim

Do you mean 29 X 7.5 Simex ET's would be alright on a 7" rim??

They are really my pick as they seem to work well on a vehicle that doesn't have wheel spinning power :lol:

Would make for a flatter profile accross the top of the tyre anyways :wink:

Ben · Post by **Ben** » Mon Mar 26, 2007 5:57 pm

DieselBoy wrote:Was going run Simex ET's on the 50, but i can't get rims to fit. (wanted to run the 29 x7.5's but can't get a 6" rim)

Why dont ya just get some stock SJ413 or SJ410 wheels? They are 15x5.5", and readily available.
That would be much better than putting them on a 7" rim too - would hold the bead better.

Ben

mroffroader · Post by **mroffroader** » Mon Mar 26, 2007 6:03 pm

Ben wrote:
DieselBoy wrote:Was going run Simex ET's on the 50, but i can't get rims to fit. (wanted to run the 29 x7.5's but can't get a 6" rim)

Why dont ya just get some stock SJ413 or SJ410 wheels? They are 15x5.5", and readily available.
That would be much better than putting them on a 7" rim too - would hold the bead better.

Ben

yea buy my 16" rims and tyres....only $100 :lol:

klompy · Post by **klompy** » Mon Mar 26, 2007 8:08 pm

So what size rims do you want DB and are they standard suk, jeep or daihatsu pattern.I have a set of 16x6 and maybe 15x5 to suit above.If they are any good to you you can have them.

Madaz · Post by **Madaz** » Mon Mar 26, 2007 9:59 pm

Hey DB
I"ve got a set of factory samurai wheels for sale, I think they are 15 x 6.5wide?

DieselBoy · Post by **DieselBoy** » Mon Mar 26, 2007 10:09 pm

I have a set of 15 X 6.5 sammie rims. The prob is the offset is not wide enough for me.

I could get the centers reversed but finding somewhere to do it these days for a realistic price has proved almost impossible.

I still may go that way though. Thats if i can't get a tyre equally as agressive as the ET's that are the right diameter that'l go on a 7" rim. (such as the swampers)

DieselBoy · Post by **DieselBoy** » Mon Apr 30, 2007 7:19 pm

This fella seems to have a shed full of Swampers:

http://www.trademe.co.nz/Browse/Listing ... d=97289723

How do his prices compare?? Anyone know who it is??

Works out at $1433.52 to get a set of 31 x 11.5's up to Hamilton. ($328.38 per tyre plus $120 freight)

Sadam_Husain · Post by **Sadam_Husain** » Mon Apr 30, 2007 7:24 pm

DieselBoy wrote:This fella seems to have a shed full of Swampers:

http://www.trademe.co.nz/Browse/Listing ... d=97289723

How do his prices compare?? Anyone know who it is??

Works out at $1433.52 to get a set of 31 x 11.5's up to Hamilton. ($328.38 per tyre plus $120 freight)

jumper wrote:i think csl3 on trade me is warren baker,
cruiser spares ltd, tel:04 5262329 or mob: 027 453 0532
When i got a windscreen off him he had lots of swampers on the rack.

he's Warren Baker as Jumper said, he's got a profile on here somewhere and yep.... he's got a big shed full of tyres :shock:

swampa · Post by **swampa** » Mon Apr 30, 2007 7:24 pm

elite wheels in chch flipped mine all i can remember is that it was cheap

DieselBoy · Post by **DieselBoy** » Mon Apr 30, 2007 7:34 pm

Sadam_Husain wrote:
DieselBoy wrote:This fella seems to have a shed full of Swampers:

http://www.trademe.co.nz/Browse/Listing ... d=97289723

How do his prices compare?? Anyone know who it is??

Works out at $1433.52 to get a set of 31 x 11.5's up to Hamilton. ($328.38 per tyre plus $120 freight)

jumper wrote:i think csl3 on trade me is warren baker,
cruiser spares ltd, tel:04 5262329 or mob: 027 453 0532
When i got a windscreen off him he had lots of swampers on the rack.

he's Warren Baker as Jumper said, he's got a profile on here somewhere and yep.... he's got a big shed full of tyres

Cheers

I love ORE :twisted:

.

.

Re: Super Swampers

Re: Super Swampers