Selling, info, or parts wanted. Anything about parts goes in here.
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 11:57 am
pls if anyone has any seats and harnesses to fit a 91 Vitara let me no
doddzee
Is Doddgee
Posts: 1211 Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland
Post
by doddzee » Thu May 10, 2007 12:04 pm
To fit?? You will be very lucky to find some that bolt in.
Keep an eye out on trade me for seats and harnesses, more than likley brackets will need to be fabricated to fit them to your rails. I picked up a set of 4 point harnesses for $60 bux still in good condition. You just have to wait for them to pop up.
MWB V8 Safari Ute
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 12:40 pm
can you watch out for me too pls pls pls pls
doddzee
Is Doddgee
Posts: 1211 Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland
Post
by doddzee » Thu May 10, 2007 1:56 pm
shell wrote: can you watch out for me too pls pls pls pls
If i hear of anything ill let you know.
Why do you want bucket seats? I find the factory seats hold quite well (I am twice your size though
)
If you are getting thrown around why not just fit harnesses and spend the cash you have for buckets on fitting a roll bar??
I think Investing an a roll bar is a much better safety feature than bucket seats.
Alot of the top mounting points on harnesses wrap around a cross bar which could be incorporated into the roll bar.
MWB V8 Safari Ute
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 2:03 pm
I wanna chop the roof and thought i should start with the seats then save the cash 4 the cage, do you think cage and harness are a beta idea?
doddzee
Is Doddgee
Posts: 1211 Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland
Post
by doddzee » Thu May 10, 2007 2:09 pm
Depends on what your long term plans for it are.
If you want to remove the roof then do it your way, seats, harness, then remove the roof and cage it later once you have cash to do it.
I was suggesting a 4-point because i assumed you were keeping the roof.
Last edited by
doddzee on Thu May 10, 2007 2:38 pm, edited 1 time in total.
MWB V8 Safari Ute
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 2:28 pm
i went and got a funcky pair of moto x goggles afta wrapping bubba around the tree on the roller coaster
@ that point i decided i didn't need the hassel of breaking more windows so i'd get rid of them all and while i was there lose the roof
oh and learn to drive goes in there somewhere ha ha ha ha ha ha ha ha ha ha ................ha ha ha ha ha
Rotazuk
Hard Yaka
Posts: 937 Joined: Mon Jun 16, 2003 12:00 pm
Location: Auckland - New Zealand
Contact:
Post
by Rotazuk » Thu May 10, 2007 2:33 pm
If you are going to cut the roof at least get a rear hoop and brace , mount the harnesses off that . The seats should be ok for now , money better spent on a cage . A couple of rally vitara's still run factory seats so they can't be too bad otherwise they would be gone .
Chris
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 3:16 pm
cool, where best to go for the cage and wat should i look at paying 4 it?
doddzee
Is Doddgee
Posts: 1211 Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland
Post
by doddzee » Thu May 10, 2007 3:24 pm
shell wrote: cool, where best to go for the cage and wat should i look at paying 4 it?
Talk to someone that knows there shit, personally id so see Brian Howat. I had a chat to him about fitting a 6 point in my vit to trials specs. Was lookng at aroung 2g
MWB V8 Safari Ute
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Thu May 10, 2007 3:28 pm
thanks
mroffroader
Hard Yaka
Posts: 2330 Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:
Post
by mroffroader » Thu May 10, 2007 6:44 pm
talk to marty....he can do a cage
80 series tow bus towing a redneck ass vitara
sig
Jeep Jeep
Posts: 1487 Joined: Thu Oct 06, 2005 12:00 pm
Location: stokes vegas
Post
by sig » Thu May 10, 2007 7:00 pm
if your looking for belts get in touch with a drag racer as they have to change theirs every couple of years so they might have or know of some surplus to requirements
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Thu May 10, 2007 8:09 pm
Isn't there a racing association or something that people can contact...
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
WACKO
Pyro
Posts: 990 Joined: Sat Feb 11, 2006 12:00 pm
Location: Lower Hutt
Post
by WACKO » Thu May 10, 2007 10:04 pm
Jerry wrote: Isn't there a racing association or something that people can contact...
for what? harnesses?
better off just goin to the stock cars and getting talking to some drivers... then casully bring up expired harnesses they may have lying around....
get cheaky.. its amazing how often it works...
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Thu May 10, 2007 10:09 pm
I'm sure there was a site that was offering them....a club might be a good contact as well.....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
daisy
Bush Crasher
Posts: 68 Joined: Tue Sep 05, 2006 12:00 pm
Post
by daisy » Thu May 10, 2007 10:15 pm
..
Last edited by
daisy on Tue Dec 11, 2007 8:33 pm, edited 1 time in total.
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Fri May 11, 2007 1:36 pm
WACKO wrote: Jerry wrote: Isn't there a racing association or something that people can contact...
for what? harnesses?
better off just goin to the stock cars and getting talking to some drivers... then casully bring up expired harnesses they may have lying around....
get cheaky.. its amazing how often it works...
thats funny and i bet i look beta in a skirt than you sam lol
doddzee
Is Doddgee
Posts: 1211 Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland
Post
by doddzee » Fri May 11, 2007 1:54 pm
shell wrote: thats funny and i bet i look beta in a skirt than you sam lol
Dunno about that, there is a small chance sam would suit a skirt
MWB V8 Safari Ute
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Fri May 11, 2007 4:57 pm
I thought Bubba was first in the queue to be waxed......he would have to wait his turn
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
MNC
Hard Yaka
Posts: 2100 Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!
Post
by MNC » Fri May 11, 2007 10:34 pm
shell wrote: ...thats funny and i bet i look beta in a skirt than you sam lol...
Dont be too sure shell...
Although I bet you'd look better in a harness
Jokes
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Sat May 12, 2007 12:15 am
She might tell you to "Belt up" if you keep these jokes up.........
I'm sure I can think of more bad jokes like this....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Sat May 12, 2007 9:42 am
Jerry wrote: She might tell you to "Belt up" if you keep these jokes up.........
I'm sure I can think of more bad jokes like this....
come on jerry i'm a big girl i can fight my own battles
MNC
Hard Yaka
Posts: 2100 Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!
Post
by MNC » Sat May 12, 2007 12:47 pm
shell wrote: come on jerry i'm a big girl i can fight my own battles
Good girl
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Sat May 12, 2007 1:04 pm
MNC wrote: shell wrote: come on jerry i'm a big girl i can fight my own battles
Good girl
you know it
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Sat May 12, 2007 1:16 pm
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
Ryan
Hard Yaka
Posts: 1187 Joined: Thu Aug 03, 2006 12:00 pm
Location: kapiti
Post
by Ryan » Sat May 12, 2007 1:34 pm
i got harnesses of trade me...0ne was aboput $60 and other was about $50...both five point....and bucket seats that i have looked at vary from $200-$600 depending on condition etc.....
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
shell
James' Mum
Posts: 259 Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:
Post
by shell » Sat May 12, 2007 1:50 pm
Ryan wrote: i got harnesses of trade me...0ne was aboput $60 and other was about $50...both five point....and bucket seats that i have looked at vary from $200-$600 depending on condition etc.....
sweet thanks
Smurf
Hard Yaka
Posts: 2867 Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson
Post
by Smurf » Sat May 12, 2007 9:32 pm
Got this if anyone wanted it???
Three point, made in 1991