wanted bucket seats and harnesses

Selling, info, or parts wanted. Anything about parts goes in here.
Post Reply
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

wanted bucket seats and harnesses

Post by shell »

:D pls if anyone has any seats and harnesses to fit a 91 Vitara let me no :wink:
User avatar
doddzee
Is Doddgee
Posts: 1211
Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland

Post by doddzee »

To fit?? You will be very lucky to find some that bolt in.

Keep an eye out on trade me for seats and harnesses, more than likley brackets will need to be fabricated to fit them to your rails. I picked up a set of 4 point harnesses for $60 bux still in good condition. You just have to wait for them to pop up.
MWB V8 Safari Ute
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

can you watch out for me too pls pls pls pls :D
User avatar
doddzee
Is Doddgee
Posts: 1211
Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland

Post by doddzee »

shell wrote:can you watch out for me too pls pls pls pls :D


If i hear of anything ill let you know.

Why do you want bucket seats? I find the factory seats hold quite well (I am twice your size though :wink:)

If you are getting thrown around why not just fit harnesses and spend the cash you have for buckets on fitting a roll bar??
I think Investing an a roll bar is a much better safety feature than bucket seats.
Alot of the top mounting points on harnesses wrap around a cross bar which could be incorporated into the roll bar.
MWB V8 Safari Ute
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

I wanna chop the roof and thought i should start with the seats then save the cash 4 the cage, do you think cage and harness are a beta idea?
User avatar
doddzee
Is Doddgee
Posts: 1211
Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland

Post by doddzee »

Depends on what your long term plans for it are.

If you want to remove the roof then do it your way, seats, harness, then remove the roof and cage it later once you have cash to do it.

I was suggesting a 4-point because i assumed you were keeping the roof.
Last edited by doddzee on Thu May 10, 2007 2:38 pm, edited 1 time in total.
MWB V8 Safari Ute
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

:lol: i went and got a funcky pair of moto x goggles afta wrapping bubba around the tree on the roller coaster :lol: @ that point i decided i didn't need the hassel of breaking more windows so i'd get rid of them all and while i was there lose the roof :twisted: oh and learn to drive goes in there somewhere ha ha ha ha ha ha ha ha ha ha ................ha ha ha ha ha
User avatar
Rotazuk
Hard Yaka
Posts: 937
Joined: Mon Jun 16, 2003 12:00 pm
Location: Auckland - New Zealand
Contact:

Post by Rotazuk »

If you are going to cut the roof at least get a rear hoop and brace , mount the harnesses off that . The seats should be ok for now , money better spent on a cage . A couple of rally vitara's still run factory seats so they can't be too bad otherwise they would be gone .

Chris
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

cool, where best to go for the cage and wat should i look at paying 4 it?
User avatar
doddzee
Is Doddgee
Posts: 1211
Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland

Post by doddzee »

shell wrote:cool, where best to go for the cage and wat should i look at paying 4 it?


Talk to someone that knows there shit, personally id so see Brian Howat. I had a chat to him about fitting a 6 point in my vit to trials specs. Was lookng at aroung 2g :o
MWB V8 Safari Ute
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

thanks :D
User avatar
mroffroader
Hard Yaka
Posts: 2330
Joined: Sat Mar 25, 2006 12:00 pm
Location: Lower Hutt WELLINGTON :D
Contact:

Post by mroffroader »

talk to marty....he can do a cage
80 series tow bus towing a redneck ass vitara :D
User avatar
sig
Jeep Jeep
Posts: 1487
Joined: Thu Oct 06, 2005 12:00 pm
Location: stokes vegas

Post by sig »

if your looking for belts get in touch with a drag racer as they have to change theirs every couple of years so they might have or know of some surplus to requirements
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

Isn't there a racing association or something that people can contact...
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
WACKO
Pyro
Posts: 990
Joined: Sat Feb 11, 2006 12:00 pm
Location: Lower Hutt

Post by WACKO »

Jerry wrote:Isn't there a racing association or something that people can contact...


for what? harnesses?

better off just goin to the stock cars and getting talking to some drivers... then casully bring up expired harnesses they may have lying around....

get cheaky.. its amazing how often it works... :lol:
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

I'm sure there was a site that was offering them....a club might be a good contact as well.....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
daisy
Bush Crasher
Posts: 68
Joined: Tue Sep 05, 2006 12:00 pm

Post by daisy »

..
Last edited by daisy on Tue Dec 11, 2007 8:33 pm, edited 1 time in total.
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

WACKO wrote:
Jerry wrote:Isn't there a racing association or something that people can contact...


for what? harnesses?

better off just goin to the stock cars and getting talking to some drivers... then casully bring up expired harnesses they may have lying around....

get cheaky.. its amazing how often it works... :lol:


thats funny and i bet i look beta in a skirt than you sam lol
User avatar
doddzee
Is Doddgee
Posts: 1211
Joined: Tue Oct 04, 2005 12:00 pm
Location: Warkworth, Auckland

Post by doddzee »

shell wrote:thats funny and i bet i look beta in a skirt than you sam lol


Dunno about that, there is a small chance sam would suit a skirt :D
MWB V8 Safari Ute
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

I thought Bubba was first in the queue to be waxed......he would have to wait his turn :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Post by MNC »

shell wrote:...thats funny and i bet i look beta in a skirt than you sam lol...


Dont be too sure shell... :lol: :wink:

Although I bet you'd look better in a harness :lol: Jokes :wink:
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

She might tell you to "Belt up" if you keep these jokes up......... :lol:

I'm sure I can think of more bad jokes like this....
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

Jerry wrote:She might tell you to "Belt up" if you keep these jokes up......... :lol:

I'm sure I can think of more bad jokes like this....


come on jerry i'm a big girl i can fight my own battles :wink:
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Post by MNC »

shell wrote:come on jerry i'm a big girl i can fight my own battles :wink:


Good girl :wink:
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

MNC wrote:
shell wrote:come on jerry i'm a big girl i can fight my own battles :wink:


Good girl :wink:


you know it :lol:
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Post by Jerry »

:lol: Sorry All I was doing was making a bad joke....not implying anything else.... :lol: :lol: :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Ryan
Hard Yaka
Posts: 1187
Joined: Thu Aug 03, 2006 12:00 pm
Location: kapiti

Post by Ryan »

i got harnesses of trade me...0ne was aboput $60 and other was about $50...both five point....and bucket seats that i have looked at vary from $200-$600 depending on condition etc.....
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
User avatar
shell
James' Mum
Posts: 259
Joined: Thu Jan 25, 2007 12:00 pm
Location: Seatoun Wellington
Contact:

Post by shell »

Ryan wrote:i got harnesses of trade me...0ne was aboput $60 and other was about $50...both five point....and bucket seats that i have looked at vary from $200-$600 depending on condition etc.....


sweet thanks
User avatar
Smurf
Hard Yaka
Posts: 2867
Joined: Tue Mar 04, 2003 12:00 pm
Location: Nelson

Post by Smurf »

Image



Got this if anyone wanted it???

Three point, made in 1991
Post Reply

Return to “4WD Parts”