Engine Transplant For Mahindra ?

Starting a project or modification? Then post it's progress here and show us some pic's.
User avatar
hyperlux1
Driver/Navigator
Posts: 38
Joined: Tue Jun 29, 2004 12:00 pm
Location: rotorua

Post by hyperlux1 »

hi there , i run a cj3b mahindra with 2.8 supra , 4spd hilux box n transfercase, 4.88 ratio diffs with lsd in the rear, hilux ln61 independent power steerbox , just fited coils too the front to improve the ride , still runs original chassis which flexis great but ripes out body mounts because of roll bar mounted inside body. bulk hp for the weight and economical
User avatar
MAHINDRACJ4A
Hard Yaka
Posts: 300
Joined: Sat May 12, 2007 12:00 pm
Location: Morrinsville
Contact:

Post by MAHINDRACJ4A »

hyperlux1 wrote:hi there , i run a cj3b mahindra with 2.8 supra , 4spd hilux box n transfer-case, 4.88 ratio diffs with LSD in the rear, hilux ln61 independent power steerbox , just fitted coils too the front to improve the ride , still runs original chassis which flexes great but ripes out body mounts because of roll bar mounted inside body. bulk hp for the weight and economical


hey got any photos ?

is it regoed ?

how much work & money was involved in putting the hilux 4spd gearbox and transfer-case in ? is the hilux gearbox better than the mahindra ? did the gear shifters close to the originals?

did you do all the work your self ?

lol didn't know that there were that many people with modded mahindras
User avatar
hyperlux1
Driver/Navigator
Posts: 38
Joined: Tue Jun 29, 2004 12:00 pm
Location: rotorua

Post by hyperlux1 »

off road use only , all done at home , sorry havnt taken any digital photos at this point but looks the same as yours flat fender, roll cage n all goes rite over driver and passenger, a great unit for stress releive , goes hard n when you break it you just weld it up again, only prob ive had was put the panhard rod for coils on the wrong side of chassis but that has been sorted
User avatar
hyperlux1
Driver/Navigator
Posts: 38
Joined: Tue Jun 29, 2004 12:00 pm
Location: rotorua

Post by hyperlux1 »

dont know about cost as i just do most of the work myself, as for hilux versus mahindra hilux wins hands down, and they are readily available, built it for play only , runs 34"swampers n 80 series cruiser winch
User avatar
MAHINDRACJ4A
Hard Yaka
Posts: 300
Joined: Sat May 12, 2007 12:00 pm
Location: Morrinsville
Contact:

Post by MAHINDRACJ4A »

i am pretty keen to do lexus v8

but need some help

i wish to run the lexus v8 with a 4x4 5spd or 4spd manual gearbox

what should i use ?

what will be the cheapest option ?

and what parts will i need to make the lexus a manual ?
User avatar
Mattman
Hard Yaka
Posts: 1643
Joined: Sun Mar 05, 2006 12:00 pm
Location: Kapiti

Post by Mattman »

Easiest way would be to get a w series gearbox and transfer case from a Surf/Hilux then search on trademe for the flywheel, bellhousing and clutch.

Matt.
User avatar
MAHINDRACJ4A
Hard Yaka
Posts: 300
Joined: Sat May 12, 2007 12:00 pm
Location: Morrinsville
Contact:

Post by MAHINDRACJ4A »

hey thanks for that

what W series gearbox am i after as there are the W50,W55,W57,W58

By the looks of things am i after the w56 ?

what should i expect to pay for engine, gearbox and all the other bits to connect the engine to the manual gearbox
User avatar
Mattman
Hard Yaka
Posts: 1643
Joined: Sun Mar 05, 2006 12:00 pm
Location: Kapiti

Post by Mattman »

Yep it's the W56 I believe.

Just do a search on trademe, they have everything listed that you will need.

Matt.
User avatar
MAHINDRACJ4A
Hard Yaka
Posts: 300
Joined: Sat May 12, 2007 12:00 pm
Location: Morrinsville
Contact:

Post by MAHINDRACJ4A »

As you know i have decided on the 1G-GTE Twin Turbo 2.0L straight 6 Supra Engine, Hopefully everything will work out
Image

1977 Mahindra CJ4A - 1GGTE 260hp Supra Engine - 3" Lift
Post Reply

Return to “Projects / Mod's”