Ln130 Surf electrical problems

For all Toyota related topics ie. Hilux, Cruiser topics
Post Reply
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Ln130 Surf electrical problems

Post by mud_lux »

Hey guys,

i've brought a 1991 hilux surf ln130, It had the factory toyota radio in it, which was buggered.. I've changed it for a sony one, but I can't figure out how to make the electric aerial go up and down, and also when I put it all back together the light behind the heater sliders isn't going (i've checked the bulb and its not blown). i've checked the fuses on the drivers kick panel and there arn't any blown ones there.

Does anyone have any idea what might cause that, is there more fuses other than the engine bay ones?

Thanks for ya help :)

Image
User avatar
BIG_BOY
Bush Crasher
Posts: 56
Joined: Thu Jul 12, 2007 12:00 pm
Location: dunedin

Post by BIG_BOY »

areial on them is a yellow wire orange stripe conect +12V 2 that & your away

& do you have voltage at the bulb socket? normaly those bulbs have a shocking conection
Nitrous is like a hot chick with a STD..... you know you wanna hit it, but you are afraid of the consequences.....
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

stuck a multimeter on the socket and got nothing..

but couldn't find blown fuse.. all the other lights are working as far as I know, like ashtray etc etc..
User avatar
BIG_BOY
Bush Crasher
Posts: 56
Joined: Thu Jul 12, 2007 12:00 pm
Location: dunedin

Post by BIG_BOY »

in that case must be a broken wire some were just cut the wires going to it & tap them in to the cigie light or something close
Nitrous is like a hot chick with a STD..... you know you wanna hit it, but you are afraid of the consequences.....
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

yeah thought that would probabley be the easiest way

thanks mate :)
User avatar
rangimotors
Hard Yaka
Posts: 1631
Joined: Thu May 10, 2007 12:00 pm
Location: chch

Post by rangimotors »

does the areial work? many are stuffed, as its been said put 12v directly onto the wire and see if it goes
Never argue with an idiot, they drag you down to their level then beat you with experiance!
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

rangimotors wrote:does the areial work? many are stuffed, as its been said put 12v directly onto the wire and see if it goes


It was working previously with the factory stereo :)
User avatar
rangimotors
Hard Yaka
Posts: 1631
Joined: Thu May 10, 2007 12:00 pm
Location: chch

Post by rangimotors »

what sort of stereo did ya put it? should have a 12v output might even beable to tell you the colour if i no the brand.. often have a fuse on the 12v output wire
Never argue with an idiot, they drag you down to their level then beat you with experiance!
User avatar
Mattman
Hard Yaka
Posts: 1643
Joined: Sun Mar 05, 2006 12:00 pm
Location: Kapiti

Post by Mattman »

You didn't accidentally use the lumination wire for a ground when you put your new stereo in did you?

Matt.
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

Mattman wrote:You didn't accidentally use the lumination wire for a ground when you put your new stereo in did you?

Matt.


I didn't hook up any of the factory wires to ground, just plugged the aerial into the socket and the stereo earth to the chassis.

theres only one light thats not working i think, just the on behind the heater, unless the rear demister and hazzard light buttons are supposed to light up as well, coz they arn't.. in which case i might have done something wrong.

It was a pain, coz someone has done a real crappy job quickly putting the factory stereo back in it, and the wiring in the back of it is all buggered.
Last edited by mud_lux on Fri Aug 17, 2007 10:52 am, edited 1 time in total.
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

rangimotors wrote:what sort of stereo did ya put it? should have a 12v output might even beable to tell you the colour if i no the brand.. often have a fuse on the 12v output wire


The stereo I put in is a Sony one, it still has the labels on the wires, so I know which ones are which on that side of it, just in the vehicle, where they are all different weird colors.. :)
User avatar
BIG_BOY
Bush Crasher
Posts: 56
Joined: Thu Jul 12, 2007 12:00 pm
Location: dunedin

Post by BIG_BOY »

BIG_BOY wrote:areial on them is a yellow wire orange stripe conect +12V 2 that & your away
Nitrous is like a hot chick with a STD..... you know you wanna hit it, but you are afraid of the consequences.....
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

BIG_BOY wrote:
BIG_BOY wrote:areial on them is a yellow wire orange stripe conect +12V 2 that & your away


yup saw that, thanks, that will be my mission for after work 2nite.. :)
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

had a play at lunch time.. the yellow wire didn't seem to do anything , but by accident i found a pink one that made it go up, but it didn't go down till i turned off the ignition (didn't go down after disconnecting wire), with toyota stereo it went down when stereo got switched off... would there be another wire to make it go down lol? this seems really complicated : :? :shock:
User avatar
UBZ
Hard Yaka
Posts: 1647
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Post by UBZ »

I have an after market stereo in my surf and the antenna goes down when the stereo is turned of
There are two accessory wires in my surf that have to be connected to make the Ariel as well factory amplifiers for the rear speakers to work .If one of the wires is disconnected the antenna stays up until I turn off the ignition.


Let me know if you cant get it sorted and ill open my dash up (agian :roll: ) and find out the colors for you

Chris
LR110 ..... LJ50 project :roll:
Chris.
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

awesome dude :)

I've found a wiring diagram on the net somewhere that apparently is for a 1991 surf, so i'll see how i go with that. Did all surfs have rear speakers? are they really obvious through the rear grills? coz i can't see any in there.

Ta
User avatar
UBZ
Hard Yaka
Posts: 1647
Joined: Sat Aug 19, 2006 12:00 pm
Location: Twizel

Post by UBZ »

My surf had cloth covers over the rear of the grills that stopped you looking in

Major mission to pull out all the rear panels to access the speakers behind :shock:

The factory speakers are 4" size and 2 ohm impedance which means you have to get rid of the whole rear speaker/amplifier setup to upgrade them, as direct replacements are not available :(

I just mounted speakers behind the grills in the right position but im not happy with the sound and plan to pull it all out again and make custom enclosures for my new rear speakers
LR110 ..... LJ50 project :roll:
Chris.
User avatar
mud_lux
Winch master
Posts: 13
Joined: Tue Aug 07, 2007 12:00 pm

Post by mud_lux »

think im sorted now, thanks people....

found that the stereo i was using, while it had a wire for auto antenna it didn't make it work.. its old, so time for a new one i think :)

and just wired the heater light up to the illumination wire for the stereo as the stereo didn't have a place for that either. :)
Post Reply

Return to “Toyota”