wanted 15x10'' rims!

doby · Post by **doby** » Fri Aug 31, 2007 5:04 pm

Im after a set of 15x10'' rims, if anyone has a set they want to sell please PM me thanks.

coxsy · Post by **coxsy** » Fri Aug 31, 2007 5:36 pm

my tyre guy told me 15x10s will be here in october, thats new ones

Smurf · Post by **Smurf** » Fri Aug 31, 2007 8:47 pm

I bought a set last month. Apparently not a lot coming into the country at the moment, I had to had to 'order' a set and wait for the next shipment to come in.
I searched for about 2 months trying to find second hand ones, but had no luck at all so had to bite the bullet and go new.

doby · Post by **doby** » Sat Sep 01, 2007 11:51 am

Got a brand new set of 35x12.5x15'' wrangler mtr's could i fit them onto 15x9'' rims, cos they are quite easy to come by where as the 15x10'' are still 5 weeks away. What should i do, what for the 15x10''?

coxsy · Post by **coxsy** » Sat Sep 01, 2007 11:56 am

Hi I put my 33x12 's on 15x8 rims reconmended size was 15x10 they are fine run well ,If you can get 15 x9 then use those they should n't be a problem, the beads will be held on more tightly save painful defelations

Smurf · Post by **Smurf** » Sat Sep 01, 2007 8:39 pm

I'd use 8 inch rims unless you are worrying about cert. Then you may need to go to 9 or 10 inch. Rim range for 35 Mt-Rs is 8.5 to 11 inches. Recommended is 10.

nibbla · Post by **nibbla** » Sun Sep 02, 2007 9:27 pm

hi have a set of 15 x 10 for sale suzuki/jeep stud pattern $500

doby · Post by **doby** » Tue Sep 04, 2007 11:02 am

Eneyone know where i can get a set of 15x9'' steel rims, in or around Auckland? thanks.

xj · Post by xj » Tue Sep 04, 2007 8:14 pm

nibbla wrote:hi have a set of 15 x 10 for sale suzuki/jeep stud pattern $500

that would be the cj stud pattern (or before), and not suitable for cherokee or tj wranglers i assume

nibbla · Post by **nibbla** » Tue Sep 04, 2007 8:23 pm

yeah thats correct

MAHINDRACJ4A · Post by **MAHINDRACJ4A** » Tue Sep 04, 2007 10:53 pm

have a look at these http://www.trademe.co.nz/Trade-Me-Motor ... 05.htm?p=1

skid · Post by **skid** » Wed Sep 05, 2007 7:49 am

you will struggle to get 9" steel rims unless you find some home made ones.

just buy 8" rims. they work fine with 12.5" wide tyres, even hold the bead on tighter.
I used to run 10" and the beads pop off easily, now I run 8" and they stay on much better.