Hi,
Wondering if anyone can tell me what sort of auto trans fluid to use in a 91 Terrano TD27 auto? The dealer where I got the service kit suggested Dextron III but wasn't sure. I'm keen to confirm before I shell out for the wrong sort.
Terrano auto trans fluid
Moderator: Mark
trans oil
hey while they or you are under there check the oil cooler lines aren't rubbing on any other part of the truck , they can pump out the trans very quickly if the hoses are danaged
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
And......... have fun filling it too, through that aquardly placed dip stick tube between the fire wall and engine.
I had a hell of a time when I topped mine up once after some dip shit undid the wrong bung when doin a oil change in a hurry.
I dont like to say who this was in fear of incriminating myself.
There may well be a bung on top of the tranny, but it is too much hassle for me to have to remove all sorts of console housing bits to get to it.



There may well be a bung on top of the tranny, but it is too much hassle for me to have to remove all sorts of console housing bits to get to it.
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
Ph 0212078472
Hi Kiwipete,
Ha ha! Easy done.
I've got just the thing for filling it. 5L bottle with a plastic tube fitted to the top. There is a small hole in the bottom of the bottle to let air in when it is inverted, which I cover with tape when filling. The tube fits down the dipstick hole and gravity feeds the tranny. It's worked a treat when I've used it before on other vehicles. Takes about 20 min. Time for a cuppa before you have to tidy up the tools!
Ha ha! Easy done.
I've got just the thing for filling it. 5L bottle with a plastic tube fitted to the top. There is a small hole in the bottom of the bottle to let air in when it is inverted, which I cover with tape when filling. The tube fits down the dipstick hole and gravity feeds the tranny. It's worked a treat when I've used it before on other vehicles. Takes about 20 min. Time for a cuppa before you have to tidy up the tools!
bmw56 wrote:Hi Kiwipete,
Ha ha! Easy done.
I've got just the thing for filling it. 5L bottle with a plastic tube fitted to the top. There is a small hole in the bottom of the bottle to let air in when it is inverted, which I cover with tape when filling. The tube fits down the dipstick hole and gravity feeds the tranny. It's worked a treat when I've used it before on other vehicles. Takes about 20 min. Time for a cuppa before you have to tidy up the tools!
Similar to my method.
Did you have any issues replacing the water pump? Have a mate at work who had to do this recently too. Hope its not a common issue.
Ok people, move along. Nothing to see here. Thank you, move along.
Ph 0212078472
Ph 0212078472
No issues with the pump. Very straightforward once the radiator was out. Took about an hour I guess. Something I found out is that there are a couple of different pumps fitted on these. Apparently the distance between the pump flange and the pulley can be different and also the fan mounting bolts. Maybe different between manual and auto models but I'm not sure. I don't think there are any problems with the pumps wearing out early. This one's done 200,000 Ks and is the original as I've had the vehicle since 35,000 and this is the first time it's been changed.