my lockright auto locker arrived today, is there anyone in the welly area who has fitted one of these able to give me a hand at some stage to fit it??
it wont be for a week or two cause i want to get all new seals and bearings to do at the same time....
cheers
help with locker
help with locker
94 nissan terrano 2inch susp lift, 3inch body lift, 33x12.5x15 maxxis bighorns
-
Sadam_Husain
- Angry bird
- Posts: 5164
- Joined: Mon Feb 20, 2006 12:00 pm
- Location: WELLINGTON
Its easy, open the box and follow the instructions 
One tip if its going in the rear. Rotazuk had a mint idea on how to get the rear axles out with out a slide hammer and it works bloody well
Tie a rope around the flange on the end of the axle, make a loop to slip a club hammer through, then swing the hammer and it acts just like a slide hammer. Use some decent rope in case you gotta get serious.
Otherwise, just mark everything in the diff carrier like it says in the book (i use a white paint pen), make sure your work area is spotlessly clean so ya don't get angle grinder dust or what ever in the diff, and then strip it apart.
The only out of the ordinary stuff you will need is lock tight and a torque wrench, some reasonably good rope and a decent sized heavy hammer (builders hammer or panel hammer won't cut it)
One tip if its going in the rear. Rotazuk had a mint idea on how to get the rear axles out with out a slide hammer and it works bloody well
Tie a rope around the flange on the end of the axle, make a loop to slip a club hammer through, then swing the hammer and it acts just like a slide hammer. Use some decent rope in case you gotta get serious.
Otherwise, just mark everything in the diff carrier like it says in the book (i use a white paint pen), make sure your work area is spotlessly clean so ya don't get angle grinder dust or what ever in the diff, and then strip it apart.
The only out of the ordinary stuff you will need is lock tight and a torque wrench, some reasonably good rope and a decent sized heavy hammer (builders hammer or panel hammer won't cut it)
lax2wlg wrote:Is that like saying 'she's hot, for a crackwhore??
Re: help with locker
Ryan wrote:my lockright auto locker arrived today, is there anyone in the welly area who has fitted one of these able to give me a hand at some stage to fit it??
it wont be for a week or two cause i want to get all new seals and bearings to do at the same time....
cheers
Yep. I've fitted one... Quite easy. I also live in the kapiti Coast.....
Send me a PM...