Rims for 1994 Escudo - would 15" fit ?
- MAHINDRACJ4A
- Hard Yaka
- Posts: 300
- Joined: Sat May 12, 2007 12:00 pm
- Location: Morrinsville
- Contact:
Rims for 1994 Escudo - would 15" fit ?
just wanting to know if 15" rims will fit a 1994 escudo ?

1977 Mahindra CJ4A - 1GGTE 260hp Supra Engine - 3" Lift
- suzuki_mike
- Driver/Navigator
- Posts: 47
- Joined: Fri Jul 27, 2007 12:00 pm
- truck-fixer
- Hard Yaka
- Posts: 194
- Joined: Thu May 10, 2007 12:00 pm
- Location: Waikuku
My 94 V6 Escudo had 16" rims at stock. I wanted to put 15" rims on it but they hit the brake calipers on the front axle. So for them to fit I got a pair of front hubs and calipers from a wrecker (Falsgrave Auto Spares here in CHCH) which were off an older model vitara that had the 1600 engine in it. Swapped all the gear over and gave my V6 hubs back to Falsgrave and then no cost was involved.
"Apparantly" Suzuki decided to put 16" rims on the V6 Escudo and then thought because they had more room behind the rim they would put bigger brakes in there too. Don't know if this is true but sounds good.
Got 15" rims on it now with larger tyres and pulls up just as good with the smaller front brakes.
"Apparantly" Suzuki decided to put 16" rims on the V6 Escudo and then thought because they had more room behind the rim they would put bigger brakes in there too. Don't know if this is true but sounds good.
Got 15" rims on it now with larger tyres and pulls up just as good with the smaller front brakes.
Re: Rims for 1994 Escudo - would 15" fit ?
MAHINDRACJ4A wrote:just wanting to know if 15" rims will fit a 1994 escudo ?
what the others said

Daihatsu Rocky and feroza also fit Zooks as well (I have zook mags on Ferozaush) Jeep and lada also have the same stud pattern as well , just to open up a bigger range of rims for ya

llıɥ ʇsɐl ʇɐɥʇ ǝʞɐɯ ʇupıp ı sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
- MAHINDRACJ4A
- Hard Yaka
- Posts: 300
- Joined: Sat May 12, 2007 12:00 pm
- Location: Morrinsville
- Contact:
- truck-fixer
- Hard Yaka
- Posts: 194
- Joined: Thu May 10, 2007 12:00 pm
- Location: Waikuku
- MAHINDRACJ4A
- Hard Yaka
- Posts: 300
- Joined: Sat May 12, 2007 12:00 pm
- Location: Morrinsville
- Contact:
Thanks thats all i need to know, was asking on behalf of a guy wanting to buy my rims on trade me
if anyone else is keen
http://www.trademe.co.nz/Browse/Listing ... =120454861
if anyone else is keen
http://www.trademe.co.nz/Browse/Listing ... =120454861

1977 Mahindra CJ4A - 1GGTE 260hp Supra Engine - 3" Lift
Warning: Some older 1600 escudo's have slighly larger calipers and don't fit all 15" rims. My '89 3Dr won't wear the mangels white-spokes, but fits the ROH's fine. I almost got stung buying mangels second-hand, but luckily I tried them on before deciding.
'89 3-Dr scud. 2" body lift, 2" suspension, Snorkel, 31x10.5's, Evil-daughter chose the paint-job.