Cheap Winchs 9500lbs $400 made in china

minefield · Post by **minefield** » Mon Oct 08, 2007 9:43 pm

I only sent all the info to them today you all should be contacted in the next few days regarding you winches

Don't worry

Graham

MNC · Post by **MNC** » Tue Oct 09, 2007 5:28 am

minefield wrote:I only sent all the info to them today you all should be contacted in the next few days regarding you winches

Don't worry

Graham

Sweet, Thanks Graham :wink:

Smurf · Post by **Smurf** » Wed Oct 10, 2007 8:24 am

Just received my email from RUNVA, they want a reply from everyone by today(WED 10 OCT), stating what winch you require, voltage, wire rope etc. They also have a few accessories on offer.

Are we going to try move the winches south ourselves or do we need to organise freight from Auckland?

minefield · Post by **minefield** » Wed Oct 10, 2007 8:55 am

I think when they arrive they will contact us and yes I think we should setn up a relay from the north to the south.

I'm from Picton so I can do the relay from Picton to say Kaikakora

Graham

Smurf · Post by **Smurf** » Wed Oct 10, 2007 8:59 am

I'm in Nelson and happy to help move any that need to go down the westcoast to Westport etc.

Post by **Mark** » Wed Oct 10, 2007 9:03 am

If they can get from Auckland to Wellington then I should be able to get them across the Cook Strait.

minefield · Post by **minefield** » Wed Oct 10, 2007 9:09 am

All we need is Auckland to Wellington , I feel sure that when they arrive people will put there hands up

Graham

Cloggy_NZ · Post by **Cloggy_NZ** » Wed Oct 10, 2007 4:42 pm

Who placed an order for a winch?
I ordered the EWX12000 with cable and a winch mounting plate.
For the other accessoires I'll be supporting one of the advertisers on here, 4wdbits.co.nz
Their prices on items like snatchblocks and tree trunk protectors are better than the guy doing the Runva winches could offer.
Did a bit of investigating and this guy Michael Mabille is the same guy who also operates http://www.winch.co.nz so with the 12 month warranty parts etc if required should not be a problem.
Also appears to be the same guy selling these on TM as Jetboy007
Reasonably good feedback re the winches on TM

basics · Post by **basics** » Wed Oct 10, 2007 4:47 pm

whats the story on the synthetic rope?

im about to order the 12,000lb but can we get a deal on the rope or not yet?

Sadam_Husain · Post by **Sadam_Husain** » Wed Oct 10, 2007 5:19 pm

basics wrote:whats the story on the synthetic rope?

talk to stinky, he supplies synthetic rope and he's local and if your lucky he'll make you a coffee when you go it to collect it :wink:

.... and after you've used synthetic you'll never want to go back to steel wire

guppy · Post by **guppy** » Wed Oct 10, 2007 6:17 pm

All we need is Auckland to Wellington , I feel sure that when they arrive people will put there hands up

Graham

i'm in auckland so can help help if need be.

rowinz · Post by **rowinz** » Wed Oct 10, 2007 7:38 pm

I've ordered a GEW10000.
I can do the the Kaikoura- Chch run. And may be able to get my brother to take some AKL - WGN, as he drives this about monthly for work, though in a Falcon sedan. Perhaps a trailer...

Big thanks once again to Graham & Mark for your efforts in this whole thing. Bloody good buggers I reckon.
R

mylux · Post by **mylux** » Wed Oct 10, 2007 9:12 pm

Agreed,thanks for good deal.i have just ordered a 12 volt 12000 lb.if you are stuck for transport give us a hollar and i may be able to get a good deal through Mcdowalls.Thanks Richard.

Sadam_Husain · Post by **Sadam_Husain** » Wed Oct 10, 2007 9:20 pm

There would be a lot of weight in transporting all those down the country, I think my 8274 weighs 40-50kg

Post by **Mark** » Thu Oct 11, 2007 8:39 am

Sadam_Husain wrote:There would be a lot of weight in transporting all those down the country, I think my 8274 weighs 40-50kg

Even if we all had to chip in to hire a trailer and pay for some fuel, as long as someone is making the trip then that's the first step.

Although, does anyone actually know what it would cost to freight them individually to each person? Say it's 50kg with the wire rope on... what would it cost to send one from Auckland to Wellington? Anyone use freight services regularly that can give us an idea?

Petemcc · Post by **Petemcc** » Thu Oct 11, 2007 9:42 am

i think it cost $60 to ship mine from auc to chch runva 9000lb

minefield · Post by **minefield** » Thu Oct 11, 2007 9:49 am

I may have something on the synthetic rope .

I have been contacted by 2 co's in China , One even had a photo of there very latest synthetic rope making machine

I have asked for a complete spec and price list

graham

kiwipete · Post by **kiwipete** » Thu Oct 11, 2007 10:26 am

Bugger you lot and your cheap winches, I am unable at this time to be able to enjoy these great discount prices due to other commitments.

Hopefuly in about 6 months or so there may be another opportunity to join in on a great deal such as this one.

turoa · Post by **turoa** » Thu Oct 11, 2007 10:45 am

stinky · Post by **stinky** » Thu Oct 11, 2007 11:22 am

Ok heard back this morning with the prices 10mm wire rated at 6400kg is $5.60 per metre. 10mm dynema rated to 10900kg $9.58 per metre. shipping would be on top of this Cheers Marty

Beer_Cruiser · Post by **Beer_Cruiser** » Thu Oct 11, 2007 12:14 pm

I have still not heard from renva.Have I missed some thing? Are they going to get hold of me or do I contact them?

Cloggy_NZ · Post by **Cloggy_NZ** » Thu Oct 11, 2007 3:55 pm

Mark wrote:Although, does anyone actually know what it would cost to freight them individually to each person? Say it's 50kg with the wire rope on... what would it cost to send one from Auckland to Wellington? Anyone use freight services regularly that can give us an idea?

On his winches that he sells on Trademe (pretty sure it is the same guy) this guy Michael who is selling us these winches has $55.00 maximum anywhere in the North Island and $75.00 maximum anywhere in the South Island.
That is not bad for what is a door to door service.
Getting them shipped in bulk, depot to depot would be a lot cheaper. We pay less then $45.00 per cubic metre at work to ship Wellington to Auckland
If someone had to drive from Wellington to Auckland to collect these winches they would need to collect at least 6 winches to make it worthwhile because it would cost at least $300 to drive up and down (there is lot more cost than just the fuel)

Post by **Mark** » Thu Oct 11, 2007 4:38 pm

Beer_Cruiser wrote:I have still not heard from renva.Have I missed some thing? Are they going to get hold of me or do I contact them?

They should have contacted you. I will email him and get him to send the email out to you as you must have been missed. If you don't hear from him by tonight let me know and I'll give him a call.

minefield · Post by **minefield** » Thu Oct 11, 2007 5:12 pm

Mark,,, I have already PMed beer cruiser ,I will send it on as soon as I get his details

Graham

navara820 · Post by **navara820** » Thu Oct 11, 2007 8:28 pm

Dam!!! Am just reading this forum now, I don't suppose its too late to sneak in a last min order????

minefield · Post by **minefield** » Thu Oct 11, 2007 9:44 pm

Name ,address, winch type and voltage, email address
I'll Need it tonight, I keep comming up excuses about lost email address
It will be ok

Graham

gbradfield@gmail.com

mylux · Post by **mylux** » Sat Oct 13, 2007 4:31 pm

Mark wrote:
Sadam_Husain wrote:There would be a lot of weight in transporting all those down the country, I think my 8274 weighs 40-50kg

Even if we all had to chip in to hire a trailer and pay for some fuel, as long as someone is making the trip then that's the first step.

Although, does anyone actually know what it would cost to freight them individually to each person? Say it's 50kg with the wire rope on... what would it cost to send one from Auckland to Wellington? Anyone use freight services regularly that can give us an idea?

I'd say at a guess it should be around $35 each depot to depot Though they would need to be packaged resonably well.if you wish for me to get a firm price give me a holla.Richard.

1bad4x · Post by **1bad4x** » Sat Oct 13, 2007 4:44 pm

mylux wrote:
Mark wrote:
Sadam_Husain wrote:There would be a lot of weight in transporting all those down the country, I think my 8274 weighs 40-50kg

Even if we all had to chip in to hire a trailer and pay for some fuel, as long as someone is making the trip then that's the first step.

Although, does anyone actually know what it would cost to freight them individually to each person? Say it's 50kg with the wire rope on... what would it cost to send one from Auckland to Wellington? Anyone use freight services regularly that can give us an idea?
I'd say at a guess it should be around $35 each depot to depot Though they would need to be packaged resonably well.if you wish for me to get a firm price give me a holla.Richard.

Just picked my one up today & they look SWEEEEET...

But in reply to your packing Q's, They are packed real well!!!!
However the cordless remote in in a small seprate box!!

He is a great guy & may pack it in the main box If it fit's & you ask nice

minefield · Post by **minefield** » Sat Oct 13, 2007 5:15 pm

The first to have a smile on his face , I hope it's not the last

Gaham

1bad4x · Post by **1bad4x** » Sat Oct 13, 2007 5:32 pm

minefield wrote:The first to have a smile on his face , I hope it's not the last

Gaham

It's

I can't see any one being diapointed with them!

A BIG THANK-YOU..
TO BOTH YOU & MARK
Well Done Guys :!:

Now just to get it on the truck

Cheap Winchs 9500lbs $400 made in china

Will you definitly buy a winch?

Rope