Towing a 4x4 landrover

New to the site? Introduce yourself, tell us what 4wd(s) you have or your new to 4wding. Ask questions look for tips and hints in here.
Post Reply
User avatar
landie
Driver/Navigator
Posts: 28
Joined: Sun Oct 21, 2007 12:00 pm
Location: palmerston north

Towing a 4x4 landrover

Post by landie »

Hi,im new to 4x4s i was just wondering if is ok to tow my s3 landrover?it's better than driving it to go bush bashing cause it rings its tits off at 60-70 kms on the open road plus it has no wof/reg.are there any tips that i need to know without shagging it? :? Any help would be mint :D
User avatar
Steve_t647
Hard Yaka
Posts: 998
Joined: Wed May 17, 2006 12:00 pm
Location: Christchurch City, In front of the computer

Post by Steve_t647 »

You can put the gearbox in Nuteral or the auto in Park and put the transfer case in nuteral it should roll easily and you are off. Not sure what others have done or do Mile tows his and I think he uses transfer case nuteral too.
Legal disclaimer: Any information I may have provided is worth exactly what you paid me for it.
User avatar
lilpigzuk
Tiger Balm
Posts: 2316
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Post by lilpigzuk »

make sure freewheeling hubs are set too free, less drag if the front wheels arent turning front diff etc
User avatar
Goose
Complete Plonker
Posts: 464
Joined: Thu Jun 22, 2006 12:00 pm
Location: Rangiuru-BOP

Post by Goose »

Mike puts his in neutral in the transfer to tow it :wink: h2olova had a landy years back, he put free wheeling hubs on all 4 wheels 8) Unlock'em, and away you go, worked bloody good :D
"He who dies with the most toys wins!!"
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

on my rover i got rangie front hubs, so no manual hubs that i can unlock.. :?

gearbox in neutral and dont slow down too much otherwise tyres lock to the right.. :roll: makes life interesting..
ImageImage
User avatar
H2OLOVA
Hard Yaka
Posts: 1153
Joined: Tue Jun 06, 2006 12:00 pm
Location: Christchurch

Post by H2OLOVA »

Steve_t647 wrote:You can put the gearbox in Nuteral or the auto in Park and put the transfer case in nuteral it should roll easily and you are off. Not sure what others have done or do Mile tows his and I think he uses transfer case nuteral too.


Might be better to have an auto in neutral for towing
***Got the balls, just ain't got the bucks***
User avatar
Steve_t647
Hard Yaka
Posts: 998
Joined: Wed May 17, 2006 12:00 pm
Location: Christchurch City, In front of the computer

Post by Steve_t647 »

H2OLOVA wrote:
Steve_t647 wrote:You can put the gearbox in Nuteral or the auto in Park and put the transfer case in nuteral it should roll easily and you are off. Not sure what others have done or do Mile tows his and I think he uses transfer case nuteral too.


Might be better to have an auto in neutral for towing


We did it this way to ensure the transfer case was in nuteral if you have both in nuteral you can tow and still spin the output shafts etc on the auto his LR has the pump for the auto on the input shaft.

He wanted to be 100% on transfer nuteral this is why he did this, not sure if they all run this way. Mike may know.
Legal disclaimer: Any information I may have provided is worth exactly what you paid me for it.
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Post by niblik »

come to think of it, mine was park and neutral when i towed it home.. i think? ehhhh... think much too coffee function well without. Image
ImageImage
User avatar
Steve_t647
Hard Yaka
Posts: 998
Joined: Wed May 17, 2006 12:00 pm
Location: Christchurch City, In front of the computer

Post by Steve_t647 »

It depends on the Auto I would tow a 4wd auto the way I iindicated, transfer nuteral. A auto car I would remove the driveshaft from one end of the diff.

Fulltime auto I would say call the AA.
Legal disclaimer: Any information I may have provided is worth exactly what you paid me for it.
Post Reply

Return to “New Members and Beginners”