For all Toyota related topics ie. Hilux, Cruiser topics
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Tue Oct 23, 2007 11:19 am
Am after these parts if anyone has them lying round:
- rear knuckle seal that goes on the back of the tcase (the bit the rear driveshat bolts on to)
- rear driveshaft
- rear diffhead (4.88 8")
- rear disc brake pistons (complete or stuffed)
is a SWB LJ71 but other cruiser parts may be similar
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Tue Oct 23, 2007 11:21 am
if you are after the rear output shaft seal for the transfer case im reasonably sure i have one lying around
toymota thats stock standard.
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Tue Oct 23, 2007 1:48 pm
Yeah that would be good my one is badly worn....is yours off a manual? .... I'll PM you
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Tue Oct 23, 2007 3:05 pm
nope mine was auto. but it free if i can find it...it might work
toymota thats stock standard.
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Tue Oct 23, 2007 4:40 pm
It may do if the transfer case is the same
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Tue Oct 23, 2007 5:52 pm
Jerry wrote: It may do if the transfer case is the same
what the last letter on your gear box code? mine was A440-F, F being the transfer. im sure that they the same just different internals
toymota thats stock standard.
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Tue Oct 23, 2007 6:03 pm
R151-F
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Tue Oct 23, 2007 6:30 pm
they the same then will go have a look now.
toymota thats stock standard.
wjw
Hard Yaka
Posts: 3420 Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:
Post
by wjw » Wed Oct 24, 2007 7:09 am
kaney wrote: Jerry wrote: It may do if the transfer case is the same
what the last letter on your gear box code? mine was A440-F, F being the transfer. im sure that they the same just different internals
Strange the Prado Autos are usually A343F, the A440 is a cruiser box.
-----------------------
Who knew Prados could fly?
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Wed Oct 24, 2007 10:09 am
wjw wrote: kaney wrote: Jerry wrote: It may do if the transfer case is the same
what the last letter on your gear box code? mine was A440-F, F being the transfer. im sure that they the same just different internals
Strange the Prado Autos are usually A343F, the A440 is a cruiser box.
prehaps mine was a343f :scratch: :scratch: :scratch:
now i remember- it htink some of the internals were stolen froma a440 to fix mine
toymota thats stock standard.
wjw
Hard Yaka
Posts: 3420 Joined: Thu Jan 15, 2004 12:00 pm
Location: Christchurch
Contact:
Post
by wjw » Thu Oct 25, 2007 7:12 am
kaney wrote: prehaps mine was a343f :scratch: :scratch: :scratch: now i remember- it htink some of the internals were stolen froma a440 to fix mine
That would be right, they are all Aisin boxes so 'some' internals are interchangable.
-----------------------
Who knew Prados could fly?
kaney
Hard Yaka
Posts: 1060 Joined: Mon Oct 31, 2005 12:00 pm
Location: christchurch
Post
by kaney » Thu Oct 25, 2007 11:25 am
kaney wrote: they the same then will go have a look now.
no luck so far, got a couple of places to look yet
toymota thats stock standard.
Jerry
Yes Dear
Posts: 8325 Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417
Post
by Jerry » Thu Oct 25, 2007 3:15 pm
I got one of Sig last night , I'll see if this one fits and get back to you...
70 series prado (KZJ78) and 90 Series Prado (KZJ95)