for sale :New transfer rebuild kit - Toyota landcruiser

adventures_more · Post by **adventures_more** » Mon Sep 24, 2007 8:35 pm

For sale : New complete landcruiser up to 85'( 34mm idler) transfer rebuild kit (Terrain tamer Tk4 Kit ), ibought the wrong one for my cruiser . so collecting dust on the shelf . yours for around $130 , i paid a bit more , so my loss -your gain !

H2OLOVA · Post by **H2OLOVA** » Mon Sep 24, 2007 9:00 pm

split case transfer? I run the H55 5 Speed and have my transfer case apart at the moment hhhmmmmmmmmm :wink:

let me know

Sadam_Husain · Post by **Sadam_Husain** » Mon Sep 24, 2007 9:10 pm

H2OLOVA wrote:split case transfer? I run the H55 5 Speed and have my transfer case apart at the moment hhhmmmmmmmmm let me know

your 70# split transfer case should be the 38mm idler kit :?:

H2OLOVA · Post by **H2OLOVA** » Mon Sep 24, 2007 9:17 pm

thats what i thought when i got my low range gears :cry:

Not quite sure whats up there??

Sadam_Husain · Post by **Sadam_Husain** » Mon Sep 24, 2007 9:21 pm

H2OLOVA wrote:thats what i thought when i got my low range gears Not quite sure whats up there??

better do some checking :oops:

I had one of those rebuild kits put through my transfercase a few years back but I didnt do it myself so I dont know what size idler it was but its supposed to be the 38mm?

edit*
did you get some of those Marks gears or something else?

H2OLOVA · Post by **H2OLOVA** » Mon Sep 24, 2007 9:32 pm

Sure did

went to test fit it all on Fri night and i have 34mm idler. I took it as a given it would be 38mm. They have a 34mm kit here in Ch Ch but only for a 4 speed, and because its a public holiday in Aus today i have to wait until tomorrow to find out what differences there are between the kits, hopefully they can mix me up a set from what he has here, otherwise will have to wait for it to come from Aus :cry:

Sadam_Husain · Post by **Sadam_Husain** » Mon Sep 24, 2007 9:35 pm

I take it you got the kit that also has the 8% high range reduction, I'll be waiting for the feedback once you've got it all sorted :thumright:

H2OLOVA · Post by **H2OLOVA** » Mon Sep 24, 2007 9:41 pm

8% high range 55% low range

Might finally be able to get some power from the 3B

I'm gonna need them when i borrow Rok or Riks tyres :wink:

It'll be interesting to see how much difference it makes, want to go to a 37" tyre (4 of them actually :lol:

) So i at least have a chance of keeping up with all the big boots that are starting to appear down here

rokhound · Post by **rokhound** » Mon Sep 24, 2007 10:53 pm

H2OLOVA wrote: So i at least have a chance of keeping up with all the big boots that are starting to appear down here

Bring it on 'Cruiser boy :lol:

. Looking forward to seeing how this kit sets up for you Jase.

H2OLOVA · Post by **H2OLOVA** » Tue Sep 25, 2007 1:17 am

start here and then add the toybox

end up with about 350:1 how stupid is that :wink:

But means that i'll be able to turn the 54 inch boggers no trouble :wink:

kaney · Post by **kaney** » Tue Sep 25, 2007 10:39 am

H2OLOVA wrote:54 inch boggers no trouble

what u compensating for with them :twisted:

adventures_more · Post by **adventures_more** » Wed Sep 26, 2007 12:26 am

H2OLOVA >>> Easy to find what size idler your Transfer has , on the rear of your case looking back towards the engine , you will have the input shaft/gear plate ( Top left ), then idler shaft ( Middle ) , Output shaft ( Bottom right ) . Just measure the round section of the end of the idler with vernier's ( i have digital version ) or tape measure or rule if you don't have one .

Most Alloy split transfer case's before 85' are 34mm idler version . i bought this kit thinking mine was the 34mm seeing as it's a wee prado , but it comes down to the year of the vehicle it came stock in not the weight or power of vehicle ( unless its been swapped out ) ?

adventures_more · Post by **adventures_more** » Wed Oct 24, 2007 5:35 pm

SOLD the kit today !