V6 Into 85 hilux any info?

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
User avatar
Scott
Hard Yaka
Posts: 156
Joined: Wed Mar 09, 2005 12:00 pm
Location: Rerewhakaaitu

V6 Into 85 hilux any info?

Post by Scott »

Putting a holden v6 8) in any info would be nice
Cheers Scott
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: V6 Into 85 hilux any info?

Post by skid »

Scott wrote:Putting a holden v6 8) in any info would be nice
Cheers Scott


which lux would this be :?: :?: :?:
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
SupraLux
Complete Bastard
Posts: 2415
Joined: Tue Dec 10, 2002 12:00 pm

Post by SupraLux »

Advance Adapters do a kit: http://72.20.96.178/commerce/ccpc1093-1 ... 0-5705.htm

This mates the factory Holden TH700R-4 auto to the transfer case from the back of the G52 or W56 gearbox found on most Hiluxes and 84-89 Surfs.

I wouldn't recommend buying direct from them, shop around as others on-sell AA parts much cheaper (have seen that kit almost $100 cheaper)

Its the same kit Marks Adapters in Oz sell, but with only one agent in NZ there is no competition and the prices are excessive. I used to have an account with Marks, but they cancelled it without notification and will no longer sell direct - so I strongly recommend buying from the US and cutting them from the loop.

On the other hand, if you want to go 5-speed the Dellows (australian) kit is a very nice looking one. Castlemaine Rod Shop also do bellhousings for them (not sure if they have a complete kit).

Hope that helps - if you want to go Auto then keep in touch as its looking like there could be a bulk buy - I know of about 4 that need to be purchased at this point.

Steve
4wdnuts
Hard Yaka
Posts: 371
Joined: Sat Aug 13, 2005 12:00 pm
Location: Queenstown

Post by 4wdnuts »

also get in contact with spankmeister. he has done this conversion
User avatar
Scott
Hard Yaka
Posts: 156
Joined: Wed Mar 09, 2005 12:00 pm
Location: Rerewhakaaitu

Post by Scott »

Thanks for your Idea's.
SKID The v6 is going into 'white trash'.Most likely get Klem and Mike to do the implant
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Post by skid »

Scott wrote:Thanks for your Idea's.
SKID The v6 is going into 'white trash'.Most likely get Klem and Mike to do the implant




8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8) 8)
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
Post Reply

Return to “Tool Shed”