More height for the Rugger

[snowdood]

Hey, ive recently scored a 1990 Rugger, and want to put her up in the air a bit. has anybody had anything to do with a similar such mission? I am wondering if it would be possible flog springs out of a hilux and put them in?? anybody know whither that might work, and any issues one might face??

[Jerry]

should be easy to do a bodylift with blocks, what about a spring over axle mod?

[86-surf]

ive got some old hilux surf rears leafs if you want them.. can you messure the length of the hol leaf then from the sold side of the leaf to the diff? .


Jase

[meece4x4]

Hey, ive recently scored a 1990 Rugger, and want to put her up in the air a bit. has anybody had anything to do with a similar such mission? I am wondering if it would be possible flog springs out of a hilux and put them in?? anybody know whither that might work, and any issues one might face??

not too sure about the Rugger I do know that the Hilux springs fit the back of the Feroza/Rocky (F300) body ... thats what I did to get a 2 inch lift in mine was to fit Hilux springs. easy way (but not the cheapest) would be to get the springs reset at an engineering firm, i was qouted $140 a pair for a 3" reset on the factory springs.

[2roky]

hilux rears ln106 model i think will fit. also longer hangers. the rugger center pin is in a slightly different place than the hilux. also you'll have to cgange the bushes to daihatsu ones


that thing has hilux springs and 3inch over standard lenght spring hangers and a 2in body lift.