Page 5 of 7
Re: auckland ore meeting night
Posted: Wed Dec 09, 2009 10:17 am
by 4x4Matt
Pencil me in! Could meet at the Bombay BP and go down as a convoy?
Re: auckland ore meeting night
Posted: Wed Dec 09, 2009 7:02 pm
by J_Dub
if i cant go this sunday consider me a pencil in....
Re: auckland ore meeting night
Posted: Wed Dec 09, 2009 8:03 pm
by T-Boon
J_Dub wrote:if i cant go this sunday consider me a pencil in....
Why not go both ?

So all penciled in, meet at the bombay BP (the on at the ofturn to puke) at say 9ish ?
Re: auckland ore meeting night
Posted: Wed Dec 09, 2009 8:38 pm
by J_Dub
yea i could, but this sunday i might not be able to get outa this bbq.
beter to meet at the Caltex bombay which is left at top of offramp which gets you straight back onto the onramp
Re: auckland ore meeting night
Posted: Thu Dec 10, 2009 9:32 pm
by snork
T-Boon wrote:ok, so how about Sat the 19th ?
Could pencil it in and see who`s keen ?
i should be there + 1 other 4wd
Re: auckland ore meeting night
Posted: Thu Dec 10, 2009 11:04 pm
by Andrew1706
Gutted my truck isn't in a legal driveable state at the moment

Re: auckland ore meeting night
Posted: Thu Dec 10, 2009 11:42 pm
by T-Boon
Andrew1706 wrote:Gutted my truck isn't in a legal driveable state at the moment

You got a weekend and week to get it sorted

Whats it need ?
Re: auckland ore meeting night
Posted: Fri Dec 11, 2009 8:47 am
by UBZ
T-Boon wrote:You got a weekend and week to get it sorted

Don't rub it in , my list seems to get longer every day. all those little things you keep putting off doing.
Radiator is fixed though

that's the main thing.
Does anyone have a air compressor i would be able to use on the day? mine has burned out all the brushes and unsure if ill get replacements in time.
C.
Re: auckland ore meeting night
Posted: Fri Dec 11, 2009 9:15 am
by T-Boon
yeah, i`ll have my little portable one with me. hasnt let me down so far

Re: auckland ore meeting night
Posted: Fri Dec 11, 2009 9:38 am
by 4x4Matt
Yeah I have an air compressor too. Got some Force tyre deflators too (Staun copies) which I'm keen to try out. I can get a whole bunch of sacks from work as the D shackles we import come in them
Re: auckland ore meeting night
Posted: Fri Dec 11, 2009 10:25 am
by Andrew1706
T-Boon wrote:yeah, i`ll have my little portable one with me. hasnt let me down so far

Wouldn't be a very good compressor if it did
My list involves: finishing dropboxes, finish headlight wiring, convert back to standard to get a WOF/do my suspension lift properly and get a cert then wof then reg then diesel milage
Sucks because I finally got my winch setup too and wanna try it out!
All in good time, much rather sit on it then drive it and get caught and fined

Re: auckland ore meeting night
Posted: Fri Dec 11, 2009 11:50 am
by T-Boon
not worth paying $40 for a trailer for the day

Trailer to and from = problem solved

Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 5:37 pm
by snork
So is this happening this Sat?
and are we still meeting at 9am?
which service station
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 5:42 pm
by J_Dub
snork wrote:So is this happening this Sat?
and are we still meeting at 9am?
which service station
x2?
sounds like its a no shiney trip..
muds, lift, recovery points front and rear minimum ide say
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 6:45 pm
by coxsy
I have a lift , rear locker, winch and simexs will be there

Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 6:46 pm
by snork
J_Dub wrote:
sounds like its a no shiney trip..
[/quote]
what makes you say that?
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 7:43 pm
by T-Boon
Yep, i`m deff there, This sat, what time should we meet a the caltex ? Remember its a $10 donation at the gate so bring some cash.
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 7:48 pm
by coxsy
someone wrote 9,am
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 8:20 pm
by UBZ
yeah i thought it was 9am as well.
I wont be going any further than ABC rock / loop start
quote from another thread from the guys who were up there yesterday
DieselBoy wrote:On a serious note, the track is going to be in need of some maintenance by the end of the year, IT IS NOT A SHINY TRACK ANYMORE.
We had busted and bent bumpers and flares on all four corners on the SWB Prado and it needed towing 3 or four times on the main track, the SWB Safari with us lost all its flares, some minor panel damage to the front end and blew a tyre off the bead.
Most of the damage occurred on the stretch of track between where the gated loop track branches off and the Tram car at the Tairua river.
Make sure you guy's all donate ya 10 bucks, its gonna be needed to run the digger to patch the track up this year!!!!!!
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 8:25 pm
by T-Boon
9am it is, and yeah its deff not a shiny track, and i think we`ll go up to the loop and chill there for a bit, then back. bit of filling and maintenance on the way if anyone knows what there doing
The loop is deff pannel damage teritory.
Re: auckland ore meeting night
Posted: Mon Dec 14, 2009 8:54 pm
by 4x4Matt
Unfortunately I'm going to have to pull out. The Hilux has hit a bit of a hurdle needing some structural rust work done for the WOF where the previous owner has bogged over. There goes more $$ just intime for Christmas

Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 5:28 am
by J_Dub
pencil me in.
9am at caltex
me and my brother in his truck = 2trucks
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 3:35 pm
by snork
which one is Caltex? the one over the other side of the motorway?
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 4:11 pm
by T-Boon
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 4:12 pm
by snork
T-Boon wrote:http://maps.google.co.nz/maps?f=q&source=s_q&hl=en&geocode=&q=bombay&sll=-41.244772,172.617188&sspn=35.221643,56.162109&ie=UTF8&hq=&hnear=Bombay,+Auckland&ll=-37.192074,174.982215&spn=0.002286,0.003428&t=h&z=18
Right next to the information centre

sweet
u bring matt?
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 4:21 pm
by T-Boon
yeah he`s coming in my truck.
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 5:25 pm
by J_Dub
i thought info center was other side a the motorway at the autobarn.
caltex is right beside the offramp, get off turn left.. which is right on the onramp to get back on going south..
i should be a definate but im spose to be going on the workshop xmas doo Friday... would rather be out wheeling than bein hungover..
is the loop start point at where that litle camp site is???????
Re: auckland ore meeting night
Posted: Tue Dec 15, 2009 6:10 pm
by T-Boon
yep thats the one, the camp and that little shelter place.
Re: auckland ore meeting night
Posted: Wed Dec 16, 2009 7:29 pm
by J_Dub
so how many trucks we got going?
2 here....
Re: auckland ore meeting night
Posted: Wed Dec 16, 2009 8:25 pm
by T-Boon
1 with me

3 total so far.