Show us your ......... JEEP

[bb402c]

na im not a pishead
every 1s impresed wif how many tops der r
has da roundabout got more decorashions

Call me old / old fashioned / not in sync with fashion, but can you please try to use a bit more of the alphabets available in the English language. I don't believe this forum charges members or visitors by the number of characters they type / post (we are not really using cellphones here, are we?). Thanks. SMS has its place, but please not on the forum.

As for your comment, I have no clue what you are on about.

think of your self as bean told of da jeep SMS has no place here just like t j's have no place over an xj

[TJ]

think of your self as bean told of da jeep SMS has no place here just like t j's have no place over an xj

What pearls of wisdom......... I make it a point of welcoming all other Jeepers with their choice of rides, XJs have their place and TJs have theirs. You are comparing apples and oranges, lets just leave it at that. But if you think a Dana 35c in the rear is better than a Dana 44, please continue with your logic. If you have to ask what these two Danas are, well.......

[TJ]

Factory rims with very average black paint job. But they look good from a distance. Will be after some 15x8 steel rims soon. But think I will get those in Black or painted black when we find some.

I have been thinking about painting my factory ones black, but mine are 16" alloys. I don't want them destroyed if the paint job doesn't come out as anticipated. I might buy one off trademe (if it comes up) and experiment.

[xj]

well would you look at that xj's jeep aint much higher than the red one .

No, not much at all.

[DAJEEP]

think of your self as bean told of da jeep SMS has no place here just like t j's have no place over an xj

What pearls of wisdom......... I make it a point of welcoming all other Jeepers with their choice of rides, XJs have their place and TJs have theirs. You are comparing apples and oranges, lets just leave it at that. But if you think a Dana 35c in the rear is better than a Dana 44, please continue with your logic. If you have to ask what these two Danas are, well.......

well i havent seen a rear diff in a xj blow before so i dont kear that its only got a 35

[Jerry]

Someone from BADNUZ/JAFA's team turned up with this redneck J20 Pickup.........

[xj]

i believe i may just have cracked a chubbie. Theres a few about still in good nick... would love one if i owned a small oilfield.

[mytronic]

http://mytronics.co.nz/Mytronics/Gallery/Pages/Photos.html#0 How do I post pictures directly ?

[xj]

dl pics into something like photobucket and copy/paste the img link from there to here.

And welcome

[ranglajeep]

[img]C:Documents%20and%20SettingsSharlineDesktoptrademejeep.jpg[/img]

[xj]

need some help there pal?

[xj]

Snapped this HDR pic at Pureora.... might be one for the wall

[yeti]

nice shot man...

[xj]

got a new camera for Xmas, and dl'd the photomatix hrd free programme. im still trying to drive it properly, and will no doubt buy the proper version soon.

[yeti]

cheers for the tow aroma

[popnit]

[aroma]

any time yeti ????????????????????????? who was driving your jeep?? enjoyed it looking for new carb now start new job on the 12 yeeha

[Isuzu MU]

When I brought it


Some weeks later

Got none of it dirty




kane

[yeti]

nice mate , welcome to site , what part of NZ are you at

[yeti]

club run a few months back

was a shiny eh rick

[coop]

Thought I'd chuck some pics of my mates XJ and my ZJ waiting on some muddies and 3.5" lift, the XJ is a bit of a weapon lol.

[tga_4x4]

Thought I'd chuck some pics of my mates XJ and my ZJ waiting on some muddies and 3.5" lift, the XJ is a bit of a weapon lol.

Is that the one from trademe ??

[xj]

My one:

When I got it she was lifted 4.5 inches on 33's, (JKS adjustable coil over spacer was sitting on stock front springs) with front locker and ARB bar. Front driveshaft (cv style) had been replaced with that of an XJ, and had a hi flow thermostat.... Since then Ive added:

1) 2 x rts (CB and UHF)
2) rear hooks
3) full size spare and rim
4) replace front springs
5) heat exchanger
6) roof rack made for hi lift and spade
7) transfer case replaced with 242
8 ) rock sliders
9) rear bar and tyre carrier
10) winch
11) install stereo with cd and ipod plug
12) got horns working (replaced)
13) heavy duty tie rod
14) quick discos
15) muffler out, twin resonators in
16) dual battery
17) 12-240 v inverter
18) air compressor (just sitting under back seat)
19) 4.10 ring and pinion
20) install Jet chip module
21) reinforced the arb bar where hooks are located
22) extended the front bumpstops
23) tinted windows (badly)

That's me done.... well maybe some bonnet vents need to go in, and the front bar may need some trimming.... and..... (shhh here she comes)

If anyones wondering, the total to date, including purchase price is $15,275.15.

[coop]

a bit of a beast you've got there xj, that would be the first one I've seen looking like that in NZ.

tga 4x4, yeah thats the one of trademe.

[xj]

I know of a long armed ZJ in Hawkes Bay... and a fairly stock one.. with a lexus v8 in it in Raglan and Ive seen two truck on TM over the past few years, the recent brown one and there was a burgundy one floating about as well. I hear there may be a couple in the South Island too. Aside from them I dont think theres too many other modded ones about.

[tga_4x4]

The new addition, 1996 Grand Cherokee, 141000km on clock pretty mint inside...,not sure what lift kit to put in as yet....

[coop]

tga_4x4 i don't know if you saw the 3.5" lift I liniked to in your ZJ and Falcon fuel economy thread, but xj pointed out the fact there is nothing in that kit to deal with the track rods.
They failed to mention in the ad that you get a rear track bar bracket with instalation instructions and also details on drilling a hole in the existing front one, so no worries there (hopefully).
I'm half way thru putting mine in, should have it in by next weekend, it cost me $1200 all up which isn't bad.

[tga_4x4]

tga_4x4 i don't know if you saw the 3.5" lift I liniked to in your ZJ and Falcon fuel economy thread, but xj pointed out the fact there is nothing in that kit to deal with the track rods.
They failed to mention in the ad that you get a rear track bar bracket with instalation instructions and also details on drilling a hole in the existing front one, so no worries there (hopefully).
I'm half way thru putting mine in, should have it in by next weekend, it cost me $1200 all up which isn't bad.

sweet let me know how you get on, just ordered some CV's for mine they are a little clicky on full lock, pretty damn easy to get them out and check, pulled both mine out, cleaned up and regreased in under 2 hours installed..

[xj]

tga_4x4 i don't know if you saw the 3.5" lift I liniked to in your ZJ and Falcon fuel economy thread, but xj pointed out the fact there is nothing in that kit to deal with the track rods.
They failed to mention in the ad that you get a rear track bar bracket with instalation instructions and also details on drilling a hole in the existing front one, so no worries there (hopefully).
I'm half way thru putting mine in, should have it in by next weekend, it cost me $1200 all up which isn't bad.

sweet let me know how you get on, just ordered some CV's for mine they are a little clicky on full lock, pretty damn easy to get them out and check, pulled both mine out, cleaned up and regreased in under 2 hours installed..

Ive put xj ltd's uni'd front axles in. Braking 2 cvs in one day did not for confidant bloke make.

[tga_4x4]

tga_4x4 i don't know if you saw the 3.5" lift I liniked to in your ZJ and Falcon fuel economy thread, but xj pointed out the fact there is nothing in that kit to deal with the track rods.
They failed to mention in the ad that you get a rear track bar bracket with instalation instructions and also details on drilling a hole in the existing front one, so no worries there (hopefully).
I'm half way thru putting mine in, should have it in by next weekend, it cost me $1200 all up which isn't bad.

sweet let me know how you get on, just ordered some CV's for mine they are a little clicky on full lock, pretty damn easy to get them out and check, pulled both mine out, cleaned up and regreased in under 2 hours installed..

Ive put xj ltd's uni'd front axles in. Braking 2 cvs in one day did not for confidant bloke make.

Is that a pretty easy conversion ?