Page 2 of 3
Re: QBE
Posted: Mon Jun 01, 2009 6:12 pm
by Jafa
Re: QBE
Posted: Mon Jun 01, 2009 6:16 pm
by haynzy
meeeooow
was nice and warm in front of my fire
took me two hours just to clean the outside of that lux today

Re: QBE
Posted: Mon Jun 01, 2009 6:45 pm
by Landy Rover
Might hire a school boy to clean mine

Re: QBE
Posted: Mon Jun 01, 2009 7:03 pm
by meatc
Finally forgave my zuk for breaking down at the Whangarei winch challenge and took it down to a mate truck yard to give it a wash. 2700 litres per min

makes light work of the mud. Just have to open the nozzle up a bit cause as a jet stream you have to lean into it and it removes paint.
Then took it home and started straightning the bent tray while it dried out enough to look at pulling the dead gearbox (this weeks job).
Also bought 2 more sets of spots of trde me. A pair of IPF 960s to go with my existing IPF 930s on the light bar and a set of hella f100's for revers lights on the zuk. (about $30 a set there are still bargins to be had.)
Re: QBE
Posted: Mon Jun 01, 2009 7:13 pm
by allmud
got rid of the safari today swaped it for a 1990 surf all std apart from the solid front diff swap coil front springs 5mg twincam and thebest part a cert reg and wof plus i got to keep my 35s
so back to the right sort of truck lol
Re: QBE
Posted: Mon Jun 01, 2009 7:20 pm
by muddyplumber
finally managed to get the bighorn rolling and outa the garage, got the hilux diffs in and all sprung over, problem iv got now is iv gotta move the front diff forward 3inchs cos with the weight of the motor the tire is hitting the guard....will sort steering and drive shafts ova the next month

Re: QBE
Posted: Mon Jun 01, 2009 7:28 pm
by J_Dub
allmud wrote:got rid of the safari today swaped it for a 1990 surf all std apart from the solid front diff swap coil front springs 5mg twincam and thebest part a cert reg and wof plus i got to keep my 35s
so back to the right sort of truck lol
wheres the pics?
Re: QBE
Posted: Mon Jun 01, 2009 7:47 pm
by allmud
i dont know how to post pics on here
ill try to find out and post some up
here is the tm link
http://www.trademe.co.nz/Browse/Listing ... =219841622
Re: QBE
Posted: Mon Jun 01, 2009 7:50 pm
by BlackCruiser
Yeh we got the same front, bloody cold as we went through Taupo

Re: QBE
Posted: Mon Jun 01, 2009 9:12 pm
by DieselBoy
Did some painting

Re: QBE
Posted: Mon Jun 01, 2009 9:17 pm
by skid
DieselBoy wrote:Did some painting
fookin sweeeeet dude
Re: QBE
Posted: Mon Jun 01, 2009 9:25 pm
by dazza85
skid wrote:DieselBoy wrote:Did some painting
fookin sweeeeet dude
What he said ... That looks great
Re: QBE
Posted: Mon Jun 01, 2009 9:26 pm
by xj
skid wrote:DieselBoy wrote:Did some painting
fookin sweeeeet dude
X3
Re: QBE
Posted: Mon Jun 01, 2009 9:33 pm
by mudslut
where is the in the sun bling shot man
Re: QBE
Posted: Mon Jun 01, 2009 9:34 pm
by wopass
churrr
i did some painting too.... squirted some bling on the gaurd that got munched up north

Re: QBE
Posted: Mon Jun 01, 2009 9:35 pm
by coxsy
pureoa goop,

share pin broke in a nasty time of day

Re: QBE
Posted: Mon Jun 01, 2009 9:39 pm
by lilpigzuk
DieselBoy wrote:Did some painting

]
So now its called the Kangaroo or Koala??
Nice work

Re: QBE
Posted: Mon Jun 01, 2009 10:00 pm
by mudslut
im stoked ,between paintin DBs new zuk this weekend ,we fitted a rock lobster to my 413 (what a huge differance it makes)
Re: QBE
Posted: Mon Jun 01, 2009 10:12 pm
by wopass
mudslut wrote:im stoked ,between paintin DBs new zuk this weekend ,we fitted a rock lobster to my 413 (what a huge differance it makes)
ohh sweeeet !!!. i thought you guys were just painting stuff, shoulda hollered, i coulda come helped with that, cant help with paint stuff cos i suk at that but i know my way round a toolbox

Re: QBE
Posted: Mon Jun 01, 2009 10:15 pm
by MNC
mudslut wrote:...we fitted a rock lobster to my 413 (what a huge differance it makes)
Rock Lobster?
Re: QBE
Posted: Mon Jun 01, 2009 10:22 pm
by wopass
MNC wrote:mudslut wrote:...we fitted a rock lobster to my 413 (what a huge differance it makes)
Rock Lobster?
410 and 413 gears cross mated in a 413 Tcase to get lower reduction gearing in low range

Re: QBE
Posted: Mon Jun 01, 2009 10:27 pm
by MNC
wopass wrote:MNC wrote:Rock Lobster?
410 and 413 gears cross mated in a 413 Tcase to get lower reduction gearing in low range

Right. Got any trick like that for a cruiser box? I may need a gear reduction

Re: QBE
Posted: Mon Jun 01, 2009 10:31 pm
by skid
MNC wrote:wopass wrote:MNC wrote:Rock Lobster?
410 and 413 gears cross mated in a 413 Tcase to get lower reduction gearing in low range

Right. Got any trick like that for a cruiser box? I may need a gear reduction

smaller tahs
Re: QBE
Posted: Mon Jun 01, 2009 10:46 pm
by MNC
skid wrote:MNC wrote:Right. Got any trick like that for a cruiser box? I may need a gear reduction

smaller tahs
Not the fix I was hoping for

Re: QBE
Posted: Mon Jun 01, 2009 10:50 pm
by DieselBoy
wopass wrote:MNC wrote:mudslut wrote:...we fitted a rock lobster to my 413 (what a huge differance it makes)
Rock Lobster?
410 and 413 gears cross mated in a 413 Tcase to get lower reduction gearing in low range

I'm gonna sound like a zook geek
Rock lobster is the 410 transfer fitted to a 413 , 12% reduction.
Rock Hopper is the chopped, pressed, butchered and blended internals of a 410 and 413 transfer, 88% reduction.
Re: QBE
Posted: Mon Jun 01, 2009 10:54 pm
by gimmemud
MNC wrote:skid wrote:MNC wrote:Right. Got any trick like that for a cruiser box? I may need a gear reduction

smaller tahs
Not the fix I was hoping for

http://www.trademe.co.nz/Trade-Me-Motor ... 152899.htmMaybe they do these for 9 inch diffs too?
Re: QBE
Posted: Tue Jun 02, 2009 11:40 am
by wopass
MNC wrote:wopass wrote:MNC wrote:Rock Lobster?
410 and 413 gears cross mated in a 413 Tcase to get lower reduction gearing in low range

Right. Got any trick like that for a cruiser box? I may need a gear reduction

marks do a gearset for the split case
http://www.marks4wd.com/products/gearma ... -gears.htm 
Re: QBE
Posted: Tue Jun 02, 2009 1:39 pm
by yorick
5.29 diffs and rear locker fitted and up and running in the Paj. Woohoo all good.
Re: QBE
Posted: Tue Jun 02, 2009 3:11 pm
by surf_tomo
Went to Welly for the weekend, first time I have been to the north island. Didnt see any recognisable trucks, and abserved very little boy racers compared to Dunedin.
Tomo.
Re: QBE
Posted: Tue Jun 02, 2009 5:12 pm
by skid
welly trucks wre all out doing things
where did ya try to observe the boy ricers