Offroad-Express

basics wrote:hi guys, got a bj70 SWB and looking for some one whose put lift blocks in there 70 serries

You probably dont want to go much more than 50mm or you'll lose your gear levers down through the floor. Took about 2Hr's to do mine. You'll have to loosen off the steering shaft clamp to let it slide out a little and check your wireing harness dosent stretch tight. The brake lines will uncoil ok and you'll have to shift your radiator shroud back down again and adjust and/or bend the transfer lever a little. So long as your petrol tank is mounted from the body you wont have to muck aroung with the filler neck.

Dead easy to do

ahah! easy once you know how. where did you get your blocks from?

may have to buy you a couple dozen piss

I got the UHMWPE blocks off a guy on trademe and brought some 10mm grade 8 bolts. There's probably a few people on here that can sort out some blocks for you... just stick something in the parts wanted threads.

I think Mark and Handbrake are in the process of doing a body lift so they may be able to steer you in the right direction