New TowHook Fitter in Welly if anyone needs

turoa · Post by **turoa** » Thu Aug 24, 2006 5:49 pm

Jerry wrote:What needs doing to it?

F+R suspension, clutch lining, bulkhead repairs and paint, engine put back in, roll cage done, fuel tank relocated, front axle rebuilt, new tyres, wiring, propshaft flanges on diff redrilled, steering box mounted, steering column made, radiator supports made.

mroffroader · Post by **mroffroader** » Thu Aug 24, 2006 6:07 pm

turoa wrote:
Jerry wrote:What needs doing to it?

F+R suspension, clutch lining, bulkhead repairs and paint, engine put back in, roll cage done, fuel tank relocated, front axle rebuilt, new tyres, wiring, propshaft flanges on diff redrilled, steering box mounted, steering column made, radiator supports made.

.......

....hehehe :lol:

WACKO · Post by **WACKO** » Thu Aug 24, 2006 7:04 pm

turoa wrote:
Jerry wrote:What needs doing to it?

F+R suspension, clutch lining, bulkhead repairs and paint, engine put back in, roll cage done, fuel tank relocated, front axle rebuilt, new tyres, wiring, propshaft flanges on diff redrilled, steering box mounted, steering column made, radiator supports made.

so next year ya reckon?

Jerry · Post by **Jerry** » Thu Aug 24, 2006 7:13 pm

And the rest....he will have found new (well actually old) bits to grind off and make better

It might be quicker to buy another Rover off TM for $100 and use that :lol:

sorry Turoa....I didn't mean it.....put the 9" grinder down and step away from it......!

mroffroader · Post by **mroffroader** » Sun Aug 27, 2006 7:42 pm

are we still on for next saturday? i may be there not sure yet tho

Jerry · Post by **Jerry** » Sun Aug 27, 2006 9:28 pm

As far as I know its all on for Sat....how many people are coming (do you want me to bring the BBQ?

It may be an idea to let Stinky (Marty) know what you may be planning to do so so he has enough metal there, if you are after hooks etc you will need to let him know so he can order them in.

Ryan · Post by **Ryan** » Mon Aug 28, 2006 8:11 pm

i saw stinky on friday and it was still all go then....

mroffroader · Post by **mroffroader** » Tue Aug 29, 2006 8:42 pm

so wat time do we meet where do we meet....stinky?????

stinky · Post by **stinky** » Tue Aug 29, 2006 10:39 pm

Ok so 10am 3 vivian st Wellington (kent tce end) there will be someone there but dont know on the help bit. This is open to all and yes we have air

mroffroader · Post by **mroffroader** » Wed Aug 30, 2006 6:35 am

stinky wrote:Ok so 10am 3 vivian st Wellington (kent tce end) there will be someone there but dont know on the help bit. This is open to all and yes we have air

swweeeeeet will most probably be there

.......we have air????

Ryan · Post by **Ryan** » Sat Sep 02, 2006 7:36 pm

great day had by all i think.....especialy stinky...hmmm
only 35s lol

i forgot those lights, ill grab them next time......

Jerry · Post by **Jerry** » Sat Sep 02, 2006 8:25 pm

Have got some pics but the upload has a bug at the moment

Bubba · Post by **Bubba** » Mon Sep 04, 2006 9:38 am

Maaaaatttttee,

I had a ball, a great day out, cut some shit, drilled some shit, bolted some shit, learnt heaps of shit about shit.

I figured out what to do and how to do it. Can't wait to get in to it.

My Christmas List doubled in size, length, and cost.

Bubba · Post by **Bubba** » Fri Sep 15, 2006 10:41 am

Jerry!!! Where's the photo's!!!

Stinky, whens the next play day!!??

Jerry · Post by **Jerry** » Fri Sep 15, 2006 3:53 pm

Next Aotea Play day is 1st Oct, there is another thread on this

mroffroader · Post by **mroffroader** » Fri Sep 15, 2006 5:32 pm

Jerry wrote:Have got some pics but the upload has a bug at the moment

u got the pics yet?

Ryan · Post by **Ryan** » Fri Sep 15, 2006 6:26 pm

bring on the photos....... :wink:

Jerry · Post by **Jerry** » Fri Sep 15, 2006 7:52 pm

pic upload isn't working yet

Ryan · Post by **Ryan** » Fri Sep 15, 2006 7:55 pm

Bubba · Post by **Bubba** » Tue Sep 19, 2006 9:16 am

Are the photo's there yet, are the photo's there yet, are the photo's there yet.

mroffroader · Post by **mroffroader** » Tue Sep 19, 2006 9:18 am

Bubba wrote:Are the photo's there yet, are the photo's there yet, are the photo's there yet.

ya me want me want ]:-) .....hey bubba you like my signature ? :lol:

Bubba · Post by **Bubba** » Tue Sep 19, 2006 9:31 am

lol yeh seen that, ahh shucks :oops:

. Problem is I got to much armour now, starting to shread my rear tires on my gaurds, trying to figure how to get more height without replacing the OME springs which I don't think I can afford to replace??? Stinky keeps telling me to do a body lift, keeps telling me how easy it is :roll:

. Problem again is $$$. Might look at cutting the gaurds, except they double skinned. (grinder, pop rivets and I'm away).

Why arn't you in school young fella! :shock:

mroffroader · Post by **mroffroader** » Tue Sep 19, 2006 9:39 am

easiest way will be to put coil spacer in and try and get away without a cert.....a body lift u will need a cert. im not at school cuz im going to my grandma's funeral today... :cry:

.......... why are u on the computer and not working ahaha

doddzee · Post by **doddzee** » Tue Sep 19, 2006 9:54 am

Bubba wrote:Stinky keeps telling me to do a body lift, keeps telling me how easy it is . Problem again is $$$. Might look at cutting the gaurds, except they double skinned. (grinder, pop rivets and I'm away).

Do the body lift yourself, mine only cost me $60, go buy some of that nylon plactic round stuff in black from catus plactics in petone, Cut, Drill, get some bolts and chuck in. Easy as :wink:

mroffroader · Post by **mroffroader** » Tue Sep 19, 2006 10:17 am

doddzee wrote:
Bubba wrote:Stinky keeps telling me to do a body lift, keeps telling me how easy it is . Problem again is $$$. Might look at cutting the gaurds, except they double skinned. (grinder, pop rivets and I'm away).

Do the body lift yourself, mine only cost me $60, go buy some of that nylon plactic round stuff in black from catus plactics in petone, Cut, Drill, get some bolts and chuck in. Easy as

yea that does sound easy...only cuz i dnt know where to buy coil spacers haha...u can do it at my place if you want...

Bubba · Post by **Bubba** » Tue Sep 19, 2006 10:31 am

doddzee wrote:
Bubba wrote:Stinky keeps telling me to do a body lift, keeps telling me how easy it is . Problem again is $$$. Might look at cutting the gaurds, except they double skinned. (grinder, pop rivets and I'm away).

Do the body lift yourself, mine only cost me $60, go buy some of that nylon plactic round stuff in black from catus plactics in petone, Cut, Drill, get some bolts and chuck in. Easy as

Stinky get off Doddzee's computer!! :lol:

NJV6 · Post by **NJV6** » Tue Sep 19, 2006 10:32 am

VN commodore springs lift the back of a Vitara aparently....

mroffroader · Post by **mroffroader** » Tue Sep 19, 2006 10:58 am

NJV6 wrote:VN commodore springs lift the back of a Vitara aparently....

yea...hes already got OME lift springs and shocks etc... but its not enough as hes got alot of bullbars weighing it down so he just needs a cheap option to give it a little more lift to stop guard rub...either a small body lift or coil spacer would do the trick

Ryan · Post by **Ryan** » Tue Sep 19, 2006 6:01 pm

Might look at cutting the gaurds, except they double skinned. (grinder, pop rivets and I'm away).[/quote]

BAD BOY BUBBA!!! No rivets get welding.......

And bring on the photos!!

Bubba · Post by **Bubba** » Wed Sep 20, 2006 9:09 am

mroffroader wrote: why are u on the computer and not working ahaha

I'm a employment consultant, which means I do SFA somedays, saying that I didn't finish till 08.30pm last night. Often have 4-5 hours of down time during the days. Also my employer was voted one of the top 10 in NZ.

Anyway, back on subject, I think Stinky has convinced me to lift the body, finally