Page 3 of 5

Re: 86-surf's surf

Posted: Thu May 01, 2008 9:03 pm
by 86-surf
my goodies arrived today:D, Heres some pics.

15x10 -44 offset

Image
Image
Image
Image
Taken about 10 minutes ago.

There focking heavy bastards ill tell ya that right now haha.

Re: 86-surf's surf

Posted: Thu May 01, 2008 9:44 pm
by skid
so have ya tried them on yet

Re: 86-surf's surf

Posted: Thu May 01, 2008 10:02 pm
by Smurf
86-surf wrote:my goodies arrived today...
There focking heavy bastards ill tell ya that right now haha.



You reckon they are heavy now??
You better get a gym membership.
They're going to end up a weeee bit heavier once you wrap some rubber round them.

Re: 86-surf's surf

Posted: Thu May 01, 2008 10:13 pm
by 86-surf
Nope:( it was dark wen i got home from work and my dad didn't get home with them from his work till 8 30?, So wont be able to even have a looksie what they look like on the surf till saterday, unles i want to get up an hour earlyer to see.

Re: 86-surf's surf

Posted: Sat May 03, 2008 1:01 pm
by 86-surf
got the tires put on the rims thismorning and put them on the truck at about 12 then a test drive at 12 30, sheesh it looks good. IT rubs a little bit on full lock but not much.. i have asqweeelling power steering belt that tels me wen to stop turning.. Makes a big thmrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrmmmmrrrrrrrrrrrr along the road wen your going tho!, and is a little bit diffrent wen driving on the road.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Re: 86-surf's surf

Posted: Sat May 03, 2008 1:06 pm
by skid
PHAT

Re: 86-surf's surf

Posted: Sat May 03, 2008 1:08 pm
by wopass
CHUURRRR

:mrgreen:

Re: 86-surf's surf

Posted: Sat May 03, 2008 1:15 pm
by Sadam_Husain
skid wrote:PHAT


x2




wopass wrote:CHUURRRR


x2


Looks good Jase, having those tyres sticking out so far will help push your truck away from banks and stuff when you in tight stuff and help protect the body work a bit (not that I think you have to worry about your surf bodywork) and stop the body from getting all hooked up on stuff

Keep up the good work :mrgreen:

Re: 86-surf's surf

Posted: Sat May 03, 2008 1:29 pm
by Jerry
Nice Mudzilla's :twisted:

Remember they love MUD and you need to keep them spinning fast to get thru, in sand they like to dig big holes, are you running tubes? coz you need to drop em to at least 10psi coz of the hard sidewalls. watch em on sidelings .... if it feels like they are sliding you off they are, trick is to keep em moving......

Re: 86-surf's surf

Posted: Sat May 03, 2008 2:55 pm
by nstg8a
haha, they look mean, makes me miss my old surf.....

Re: 86-surf's surf

Posted: Sat May 03, 2008 3:09 pm
by surf_tomo
Looking really good, get them out in the mud! :D :D

Re: 86-surf's surf

Posted: Sat May 03, 2008 3:14 pm
by 86-surf
not tubed yet they, didn't have any instock, so i got them to order me some.

It looks so much better in person tho:D, my mum even said it looked hott? lol.

Was looking at it from about 20 meters AWAY from the rear and damn it looked soooo good:D, just waiting for dad to get back from the beach hop to see what he says:D.

Re: 86-surf's surf

Posted: Sat May 03, 2008 3:16 pm
by 86-surf
beleve me i want to get them out in the mud....

its way more bumpyer now tho and you feel every pot hole. but i stilll love it

Re: 86-surf's surf

Posted: Sat May 03, 2008 5:43 pm
by GotFlex
they look mint bro, are they brand new tyres?
33x13.5r15?

Re: 86-surf's surf

Posted: Sat May 03, 2008 5:49 pm
by 86-surf
madterrano wrote:they look mint bro, are they brand new tyres?
33x13.5r15?


nope the tyres are prity warn out, but it does look mint!

Re: 86-surf's surf

Posted: Sun May 04, 2008 12:17 pm
by Engineer
what did the rims cost ya?
Looks good.

Ryan.

Re: 86-surf's surf

Posted: Sun May 04, 2008 1:09 pm
by 86-surf
Engineer wrote:what did the rims cost ya?
Looks good.

Ryan.


$115 ea $490 all up including shipping from welly.

Re: 86-surf's surf

Posted: Sun May 04, 2008 1:31 pm
by Dace
Looks Phat

Now just gotta ditch the Towbar! :mrgreen:

What size are the zillas?

Ya say it rubs a bit on full lock but how about when ya suspension is compressed?

Re: 86-surf's surf

Posted: Sun May 04, 2008 1:36 pm
by Engineer
86-surf wrote:
Engineer wrote:what did the rims cost ya?
Looks good.

Ryan.


$115 ea $490 all up including shipping from welly.


where from mate?
i need some for my surf dont think i want such a large offset tho!!

Re: 86-surf's surf

Posted: Sun May 04, 2008 1:57 pm
by SupraLux
Its starting to look like a 4WD again :mrgreen: good work...

Re: 86-surf's surf

Posted: Sun May 04, 2008 3:08 pm
by UBZ
Nice work Jase

Defiantly looks like a real 4wd know :twisted:
Just needs mud ,dents and scratches

Re: 86-surf's surf

Posted: Sun May 04, 2008 3:31 pm
by nstg8a
UBZ wrote:Nice work Jase

Defiantly looks like a real 4wd know :twisted:
Just needs mud ,dents and scratches


been waiting for mud, dent and scratches since the start of this thread.... come on jase, no excuses now, lets see it get dirty... its looking good, just needs to be used :P

Re: 86-surf's surf

Posted: Sun May 04, 2008 3:38 pm
by skid
nstg8a wrote:
UBZ wrote:Nice work Jase

Defiantly looks like a real 4wd know :twisted:
Just needs mud ,dents and scratches


been waiting for mud, dent and scratches since the start of this thread.... come on jase, no excuses now, lets see it get dirty... its looking good, just needs to be used :P




I think this qualifies.....................


Image


looks close to getting a real big dent

Re: 86-surf's surf

Posted: Sun May 04, 2008 4:05 pm
by smurf182
86-surf wrote:got the tires put on the rims thismorning and put them on the truck at about 12 then a test drive at 12 30, sheesh it looks good. IT rubs a little bit on full lock but not much.. i have asqweeelling power steering belt that tels me wen to stop turning.. Makes a big thmrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrmmmmrrrrrrrrrrrr along the road wen your going tho!, and is a little bit diffrent wen driving on the road.


Looks sweet.

Whereabouts is the rubbing? My 33s rub on the sway bar and the pitman arm, I need some rims with a bit more offset but not so much that I start rubbing on the body.

Re: 86-surf's surf

Posted: Sun May 04, 2008 5:01 pm
by 86-surf
Engineer wrote:
86-surf wrote:
Engineer wrote:what did the rims cost ya?
Looks good.

Ryan.


$115 ea $490 all up including shipping from welly.


where from mate?
i need some for my surf dont think i want such a large offset tho!!


I got them off a guy on tm.

DBWRacing wrote:Looks Phat

Now just gotta ditch the Towbar! :mrgreen:

What size are the zillas?

Ya say it rubs a bit on full lock but how about when ya suspension is compressed?


There 33x13.5, I have know idea on how bad the rub is wen its compressed i geuss i will av to find out.
UBZ wrote:Nice work Jase

Defiantly looks like a real 4wd know :twisted:
Just needs mud ,dents and scratches


It has alot of scratches. and a few little dents haha... Cant see them in the picture tho..
smurf182 wrote:
86-surf wrote:got the tires put on the rims thismorning and put them on the truck at about 12 then a test drive at 12 30, sheesh it looks good. IT rubs a little bit on full lock but not much.. i have asqweeelling power steering belt that tels me wen to stop turning.. Makes a big thmrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrmmmmrrrrrrrrrrrr along the road wen your going tho!, and is a little bit diffrent wen driving on the road.


Looks sweet.

Whereabouts is the rubbing? My 33s rub on the sway bar and the pitman arm, I need some rims with a bit more offset but not so much that I start rubbing on the body.


it's rubbing where the two seems are welded to geather? i on't know if thats the corect name, but you can see where it has ripped the plastic away in one of the pictures..

Re: 86-surf's surf

Posted: Sun May 04, 2008 5:10 pm
by 86-surf
where do i get flares from??.

i remember a post on here about getting some garden trim or somthing from bunnings? and it works good as flares.

Re: 86-surf's surf

Posted: Sun May 04, 2008 6:08 pm
by Dace
My new tyres were rubbin on the seam also, just "Massaged" the seam inwards with a big fargin hammer, aswell as adjusting part of the floor plan with the same method. then applied some underseal to stop iron oxide.

I also cut the plastic guardliner off where it joins to the lower guard and bashed the gyard lip back on it self behind the guard, otherwise the first time ya susp compress and ya wheel turns, the sharp edge will slice into ya tread

Re: 86-surf's surf

Posted: Mon May 05, 2008 9:21 am
by 86-surf
DBWRacing wrote:My new tyres were rubbin on the seam also, just "Massaged" the seam inwards with a big fargin hammer, aswell as adjusting part of the floor plan with the same method. then applied some underseal to stop iron oxide.

I also cut the plastic guardliner off where it joins to the lower guard and bashed the gyard lip back on it self behind the guard, otherwise the first time ya susp compress and ya wheel turns, the sharp edge will slice into ya tread


Thanks dbw. Will this affect me getting a warrent?

Re: 86-surf's surf

Posted: Mon May 05, 2008 12:12 pm
by wopass
86-surf wrote:where do i get flares from??.

i remember a post on here about getting some garden trim or somthing from bunnings? and it works good as flares.


yes that exactly 8) many on here using bunnings flares now, me included :mrgreen:

Re: 86-surf's surf

Posted: Mon May 05, 2008 12:29 pm
by nstg8a
86-surf wrote:
DBWRacing wrote:My new tyres were rubbin on the seam also, just "Massaged" the seam inwards with a big fargin hammer, aswell as adjusting part of the floor plan with the same method. then applied some underseal to stop iron oxide.

I also cut the plastic guardliner off where it joins to the lower guard and bashed the gyard lip back on it self behind the guard, otherwise the first time ya susp compress and ya wheel turns, the sharp edge will slice into ya tread


Thanks dbw. Will this affect me getting a warrent?



wont affect it if they dont know... i took my innner guard out, smashed back the seam than put the inner guard back in, you cant tell its been done that way...

pic above looks primo too, be interesting to see how your tyres wear, im looking at a set of 35's for my patrol, but they will get a bit of road use so not too sure.