bj40 build...

Starting a project or modification? Then post it's progress here and show us some pic's.
Post Reply
User avatar
kbjj
Sausage Shack
Posts: 712
Joined: Sat Apr 10, 2010 3:51 pm
Location: Rangiora

Re: bj40 build...

Post by kbjj »

Looks like drivers got a seatbelt. Whats the prob? Passenger will be busy pushing/winching. :lol:
If you break it... build it stronger.
User avatar
Chopper01
Rock God
Posts: 494
Joined: Fri Dec 14, 2007 12:00 pm
Location: CHCH

Re: bj40 build...

Post by Chopper01 »

niblik wrote:hopin for one like this...

is this what it looks like chop?

if not, does anyone have one to suit?

Image


mine are the same as that one just not as clean :lol: :lol: :lol:
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

sweet chop.. cheers..

and too true kbjj.. :lol:

today a cobber came round with his tig and help fizz some snorkel bits together..

put a 45 degree kicker onto this bit of snorkel as it wasnt aligned up right and was gayer than, well, rex.
Image

through the firewall and perspex..
Image

comes out on the outer side of the cage through the 'door jam'..
Image

sits pretty snug like this..
Image

so it tucks in out of the way, can lay on rocks or what-have-you and keeps troubles free.. follows lines of the cage and still enables me to put the windscreen down if i feel the need..
ImageImage
User avatar
rokhound
Hard Yaka
Posts: 2558
Joined: Sat Apr 22, 2006 12:00 pm
Location: Christchurch

Re: bj40 build...

Post by rokhound »

You better make sure that pass harness is in before you let one of your brood sit there Nibz, they will sucked up that bad boy :mrgreen: :mrgreen:

(ps. take all the harness' that chop has to offer and then I won't feel so bad stealing one off you :P )
Ugly is a state of mind..... and the state of my truck!
User avatar
MNC
Hard Yaka
Posts: 2100
Joined: Sun Apr 02, 2006 12:00 pm
Location: Close to (wishing I was closer to) the Puhoi Pub!

Re: bj40 build...

Post by MNC »

niblik wrote:...put a 45 degree kicker onto this bit of snorkel as it wasnt aligned up right and was gayer than, well, rex...


:lol: Surely not that gay :lol: :wink:

rokhound wrote:You better make sure that pass harness is in before you let one of your brood sit there Nibz, they will sucked up that bad boy :mrgreen: :mrgreen:


:lol: This is gold - snork looking great - lovin this thread, tech, heaps of pics, and classic calls through out - What more could you want :mrgreen:
Image
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: bj40 build...

Post by wopass »

MNC wrote:
niblik wrote:...put a 45 degree kicker onto this bit of snorkel as it wasnt aligned up right and was gayer than, well, rex...


:lol: Surely not that gay :lol: :wink:

rokhound wrote:You better make sure that pass harness is in before you let one of your brood sit there Nibz, they will sucked up that bad boy :mrgreen: :mrgreen:


:lol: This is gold - snork looking great - lovin this thread, tech, heaps of pics, and classic calls through out - What more could you want :mrgreen:


tits and arse would make it perfect :wink:
If you already know everything, DON'T ask bloody questions!!
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: bj40 build...

Post by PR »

Well put :mrgreen: Wopass :wink:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

sweet as fellas....

nice pair of tits....
Image

and some arse...
Image

enjoy wop and PR, you sicko's... *nibz shuns them both...*

on a more thread related topic, finished mounting the snorkel top and bottom.. bolted to cage at top, drilled and tapped styles and bolted through door frame below.

also made a manifold to plumb all the breathers from both diff's, gearbox and transfers into and have a filter on. lines come through firewall and into manifold in up behind dash.

no pics. wopass and PR took all the joy tonight..
ImageImage
User avatar
kbjj
Sausage Shack
Posts: 712
Joined: Sat Apr 10, 2010 3:51 pm
Location: Rangiora

Re: bj40 build...

Post by kbjj »

Nice snorkel. Looks similar to mine... dairyish. :wink: Finished yet? When do I pick u up?
If you break it... build it stronger.
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: bj40 build...

Post by PR »

I should know you would have put somthing up like that :roll: :roll: :lol: :lol: :lol: :lol: :lol: We must be lucky to have animal pictures cause if it was Rex it would of been pictures of guys :shock: :shock: :lol:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: bj40 build...

Post by skid »

Image

Image
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
basics
Hard Yaka
Posts: 1511
Joined: Fri May 11, 2007 12:00 pm
Location: Wellington

Re: bj40 build...

Post by basics »

in one page this threads standards have dropped to zero, mainly from you skid :lol:
99 pajero exceed 3.2
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

got cage prepped for paintin..

had started the ole biartch up again and the damned thing leaked again, not as bad, but leaked a little oil.. so called captain toyota and ordered some decent off the shelf stocko styles gaskets..

all fixed.. mint!! feckin converted..

with much thanks to rex for helpin me out, i was able to get the alternator and its external regulator all hooked up and running..

he's a guru.. :!:

if anybody needs any wiring done in the north island near him, he's the go to guy.. thanks rexo.. :wink: :mrgreen:
ImageImage
User avatar
ClassicCruiserSpares
Sausage Shack
Posts: 1259
Joined: Sat Jan 16, 2010 9:16 pm
Location: Christchurch,

Re: bj40 build...

Post by ClassicCruiserSpares »

Good to hear its running again, what colour you painting the cage? are you going to do the body too?
Toyota Landcruiser FJ40, front and rear lockers, 35" simex.
Toyota FJ45 build in progress.
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set.
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

was thinkin good old black cage.. tub is el rusto fantastique on beige.... may go a quick matt black on it, but we'll see..
ImageImage
User avatar
rokhound
Hard Yaka
Posts: 2558
Joined: Sat Apr 22, 2006 12:00 pm
Location: Christchurch

Re: bj40 build...

Post by rokhound »

niblik wrote:with much thanks to rex for helpin me out, i was able to get the alternator and its external regulator all hooked up and running..

he's a guru.. :!:

if anybody needs any wiring done in the north island near him, he's the go to guy.. thanks rexo.. :wink: :mrgreen:



Remove ya tongue you sad barrrrsttttarrrdd, before it gets stuck up there forever :mrgreen: :mrgreen:
Ugly is a state of mind..... and the state of my truck!
User avatar
lilpigzuk
Tiger Balm
Posts: 2316
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: bj40 build...

Post by lilpigzuk »

niblik wrote:
all fixed.. mint!! feckin converted..

with much thanks to rex for helpin me out, i was able to get the alternator and its external regulator all hooked up and running..

i


I thought it was a starter motor :?
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

put rear bottom shock mounts in today... mint.. 8)
ImageImage
User avatar
aroma
Hard Yaka
Posts: 753
Joined: Sat Apr 21, 2007 12:00 pm
Location: christchurch

Re: bj40 build...

Post by aroma »

saw the shed door open this arvo :D pic's
User avatar
lilpigzuk
Tiger Balm
Posts: 2316
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: bj40 build...

Post by lilpigzuk »

aroma wrote:saw the shed door open this arvo :D pic's


:? :?:

Image

:mrgreen:
User avatar
wopass
Hard Yaka
Posts: 5324
Joined: Tue Feb 22, 2005 12:00 pm
Location: Godzone

Re: bj40 build...

Post by wopass »

lilpigzuk wrote:
aroma wrote:saw the shed door open this arvo :D pic's


:? :?:

Image

:mrgreen:


AAHHHhahahahha ah ah ahahahah ahah ahaha

babahahahahahaaaahahah hahhaha

shot :lol:
If you already know everything, DON'T ask bloody questions!!
User avatar
skid
Tyre Man
Posts: 6311
Joined: Thu Oct 06, 2005 12:00 pm
Location: WELLINGTON-0272417757
Contact:

Re: bj40 build...

Post by skid »

ImageImageImageImage

Image
80 Series on 35" creepies, manual with twin factory lockers.
0272417757

*CHILLAX BRO.*
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

c'mon rex.. who you kiddin? you couldnt get enough of my tasty hot meaty wonton dumplings in your mouth... why did allie text wantin my cream of sum yung guy?

and you were the one wanting a poo poo platter... :?

:mrgreen:
ImageImage
User avatar
lilpigzuk
Tiger Balm
Posts: 2316
Joined: Mon Dec 09, 2002 12:00 pm
Location: Counties

Re: bj40 build...

Post by lilpigzuk »

niblik wrote:c'mon rex.. who you kiddin? you couldnt get enough of my tasty hot meaty wonton dumplings in your mouth... why did allie text wantin my cream of sum yung guy?

and you were the one wanting a poo poo platter... :?

:mrgreen:


and they were some filling dumplings!! Shes a keeper :lol:

Back to the build. Got rid of the vibration......... out of the rear..... driveshaft..... :?: :mrgreen: You mentioned something about a double...cardon?? No really, better add some tech before Mike cleans this thread :mrgreen:
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

painted the cage and associated bits... rain = teh suck!

Image
ImageImage
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: bj40 build...

Post by PR »

Almost finished :lol: :lol: how many yearswas that :wink:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

PR wrote:Almost finished :lol: :lol: how many yearswas that :wink:


oh ahahahaha oh dear me hohohohoh oh :lol: gee whiz pwahahaha *deep breath* ho ho ho ho ho oh chortle glee snicker dee laugh.......

wow. you've been whippin the same line for just about as long. :roll: *nibz yawns at lack of creativity*
ImageImage
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: bj40 build...

Post by PR »

niblik wrote: lack of creativity*

:lol: thats what we were thinking for so many years :lol: I will have to come back down to see the beast in action when it is finally finished :mrgreen:

keep up the good work the end is in site :wink: :twisted:
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
niblik
Sausage Shack
Posts: 3305
Joined: Wed May 03, 2006 12:00 pm
Location: erm.. out in the shed for a mo...

Re: bj40 build...

Post by niblik »

seein the rain stopped, paint could be chucked about with reckless abandon upon the barwork.. oh glee iddly..
Image

overflow floobin von-bottle mount boobin..
Image

glubin flubin rear shocks gone oob in..
Image

put some laggin and wrap around the bars above my noodle.. :mrgreen:
Image
ImageImage
User avatar
Mongoose
Hard Yaka
Posts: 378
Joined: Sun Oct 02, 2005 12:00 pm
Location: Christchurch-ish

Re: bj40 build...

Post by Mongoose »

Nice Nibs! On the shot of the bars it looks like the pipe out of the turbo loops round and back into it for EVEN MOOOAR POWERS! :twisted:
Post Reply

Return to “Projects / Mod's”