Rallywoods Working Bee 3 : 16th/17th Feb

Planning a trip and want others to join? Then post the details in here. Don't forget contact details, dates and difficulty level.

Post Reply
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

Maybe the 1st person to do a dumbass thing, get stuck or break down pilots the vac :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

Jerry wrote:Maybe the 1st person to do a dumbass thing, get stuck or break down pilots the vac :lol:

well i'm safe from getting stuck and/or breaking down so i guess i won't be piloting the vac then... :twisted: :twisted:
truckless and shall remain so till she who wears the pants says otherwise.................lol
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by taz01 »

IcedJohnno wrote:I'd love to be that drunk but I think I would have to be very drunk :shock: :evil: :oops: :roll: :?: for me to think I could ever operate a Rallywoods vacaum cleaner from down here in HillBilly Country.

How about Taz01? :lol:


sure cant be too hard to operate like falling into a river..........oh wait that only happens to hillbilly's visiting rallywoods :lol:
hey have i found a mud hole for you next time your up :twisted:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by taz01 »

wgtnnewbie wrote:well i'm safe from getting stuck and/or breaking down so i guess i won't be piloting the vac then... :twisted: :twisted:


guess again :twisted: :twisted: :twisted:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

Maybe we could fit difflocks to the vac for him :lol: I'm sure I saw some really big piles of dirt in the hut :lol:
Last edited by Jerry on Tue Feb 12, 2008 6:43 pm, edited 1 time in total.
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Beer_Cruiser
Hard Yaka
Posts: 859
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Beer_Cruiser »

Jerry wrote:Maybe the 1st person to do a dumbass thing,
wgtnnewbie wrote:well i'm safe from getting stuck and/or breaking down so i guess i won't be piloting the vac then... :twisted: :twisted:
:lol:

Then again maybe you will
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

What are ya all, a bunch of blouses? someone will bring their wife/girl friend up and she might know how to get that vacuum thingy started... if not, no problem, we just watch it and see if it knows what to do... if no then it becomes part of the bonfire! WOO HOO!! 8) 8)
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

taz01 wrote:
wgtnnewbie wrote:well i'm safe from getting stuck and/or breaking down so i guess i won't be piloting the vac then... :twisted: :twisted:


guess again :twisted: :twisted: :twisted:


hey it won't count if you guys do stuff to my car, and as i want to sell it i sure as hell won't be doing anything stupid in it..... :twisted: :twisted:
truckless and shall remain so till she who wears the pants says otherwise.................lol
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by taz01 »

Jerry wrote:So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:


or 86 surf as an initiation to rallywoods
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

Jerry wrote:So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:


nope no and umm never.......... :lol:
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

taz01 wrote:
Jerry wrote:So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:


or 86 surf as an initiation to rallywoods


actually as the apprentice 86 surf will have to do the vacuming.....in that case perhaps i should put my hand up for one of the osh positions i'm sure i could be relied on to miss vital safety issues, issue weird directives that have no actual bearing on the process underway...and other things that osh people seem to be good at.. :twisted:
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

I nominate Glenn for getting stuck in the river :lol: and Cloggy should help him for breaking more rover bits

Organisers and trip leaders are exempt as previously stated :lol: so thats Myself, Tony and Reece out of the Running.... :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by taz01 »

wgtnnewbie wrote:
Jerry wrote:So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:


nope no and umm never.......... :lol:


hey beercruiser how big a car did ya need to fill that hole in the river ????? :lol: :lol: :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
86-surf
Hard Yaka
Posts: 893
Joined: Fri Nov 02, 2007 12:00 pm
Location: Rotorua

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by 86-surf »

as an apprentice i am not qualified to touch the vac
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

86-surf wrote:as an apprentice i am not qualified to touch the vac


qualifications aren't needed that is why the various supervisors and overseers are there for.... :twisted:
truckless and shall remain so till she who wears the pants says otherwise.................lol
taz01
Tazzles
Posts: 1644
Joined: Sat Nov 25, 2006 12:00 pm
Location: Lower Hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by taz01 »

86-surf wrote:as an apprentice i am not qualified to touch the vac

ah but with wgtnnewbies osh expertise the pair of you will be done in no time then and only then you both can remove ya pinnys
we will try to refrain from laughing with you not at you and basically go get pissed :lol:
WARNING:
Insanity has replaced reason in the modification of this vehicle

you can follow me, but its gunna hurt
User avatar
86-surf
Hard Yaka
Posts: 893
Joined: Fri Nov 02, 2007 12:00 pm
Location: Rotorua

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by 86-surf »

Sheet you guys are a bunch of woosys call your self a man!, Yeah right!, ill do the blody vacuming lmao ,
i do the vacuming at home every second day so it can be my punishment for leaving home :twisted: ,
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

Woohoo ..... we expect the floor clean enough for Bubba to pass out on :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Beer_Cruiser
Hard Yaka
Posts: 859
Joined: Tue Jun 05, 2007 12:00 pm
Location: now in B O P

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Beer_Cruiser »

taz01 wrote:
wgtnnewbie wrote:
Jerry wrote:So everyone is in agreement that Wgtn Newbie pilots the Vac :lol:


nope no and umm never.......... :lol:


hey beercruiser how big a car did ya need to fill that hole in the river ????? :lol: :lol: :lol:

Its a big hole.Seen it take a baby cruiser and a disco
User avatar
86-surf
Hard Yaka
Posts: 893
Joined: Fri Nov 02, 2007 12:00 pm
Location: Rotorua

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by 86-surf »

Jerry wrote:Woohoo ..... we expect the floor clean enough for Bubba to pass out on :lol:



well in that case shouldn't i dirty it up for him?
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by abbo »

still in for saturday i have some chains do you want me to bring them up for your little tow job jerry ????what time is the gate going to be unlocked guys, or is it going to be at the same place :?: Plus do we still need chainsaws or is that all sorted that part :mrgreen: 8)
Don't have 4wd.
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Sadam_Husain »

abbo wrote:what time is the gate going to be unlocked guys, or is it going to be at the same place :?:


Jerry, can you post some meeting times for Friday and Saturday so we can start getting ourselves orgainsed
User avatar
wgtnnewbie
Hard Yaka
Posts: 708
Joined: Sat May 26, 2007 12:00 pm
Location: naenae, lower hutt

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by wgtnnewbie »

Sadam_Husain wrote:
abbo wrote:what time is the gate going to be unlocked guys, or is it going to be at the same place :?:


Jerry, can you post some meeting times for Friday and Saturday so we can start getting ourselves orgainsed


hear hear
truckless and shall remain so till she who wears the pants says otherwise.................lol
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

abbo wrote: do we still need chainsaws


Sadam, can you bring the little chainsaw? might need it on one or two trees... :D 8) :D
User avatar
Sadam_Husain
Angry bird
Posts: 5164
Joined: Mon Feb 20, 2006 12:00 pm
Location: WELLINGTON

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Sadam_Husain »

suzuki1k wrote:Sadam, can you bring the little chainsaw? might need it on one or two trees... :D 8) :D


Shit you dont have to ask me twice Image



Image
User avatar
SV1K
Site Admin
Posts: 1520
Joined: Wed Feb 07, 2007 12:00 pm
Location: Wellywood

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by SV1K »

Sadam_Husain wrote:Shit you dont have to ask me twice Image


Image

WOO HOO!! thats the one!! 8) 8) :twisted: :twisted: 8) 8)
User avatar
abbo
Hard Yaka
Posts: 841
Joined: Mon Jun 18, 2007 12:00 pm
Location: Masterton

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by abbo »

how big are theses trees man :shock: bags not carrying the rings if you need a saw that size to cut them up :shock: :D :roll: :twisted:
Don't have 4wd.
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

Meeting Times:

Do people need meeting at Moonshine & Haywards or the Rallywoods Gate?

Friday: 6.30pm? any more needed

Sat : 9.00am?, Midday?

Sunday: 9am?


ps Bundys chainsaw is bigger isn't it :lol:
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
User avatar
Jerry
Yes Dear
Posts: 8325
Joined: Tue May 30, 2006 12:00 pm
Location: Wellington 027 479 2417

Re: Rallywoods Working Bee 3 : 16th/17th Feb

Post by Jerry »

Theres a stainless steel kitchen bench at Marks place that needs picking up and bringing up to Rallywoods if someone is able to get it on the way
70 series prado (KZJ78) and 90 Series Prado (KZJ95)
Post Reply

Return to “Planning a trip?”