Offroad-Express

hi i have a 1994 landcruiser prado with the 3.0 d t 1kzte motor your thoughts on putting on 33 12.5 15 on thanks

yep can be done on standard suspension as well

im running 33 x 12.5 x 15 BFG with my 1KZ manual , heaps of power even without a diff ratio change.

Gets very hot though Would defiantly recommend a temp gauge mod or aftermarket temp guage.

33x12.5 is the biggest size you can run without too much trouble. 35s require a diff change to 4.8 ratio or you run out of power .

I've got 33's on my LJ71, Sumitomos that actually measured up at 32" when new @ 30psi. They did rub occasionally at full lock/squish in the front & just hit the top of the wheel arch in the back on hard landings. With new 40mm higher springs & packing the bump stops down a touch no more probs.

Cheers
Clint

put 33 12.5 15 on and they are rubbing on full lock in the inside of tyre on the radious arm is there a cheap and easy way to fix this or are the tyres just to big

maybe one of those spacers (5mm think if my memroy serves me) would be enough to space them out. Dont know the legalities of the thin spacer (cert or not).

do they still make them that small but no they should be fine nothing a bit of masageing wont fix

Running 33" mudzilla's on my LJ71, runs fine, has a 2" OME suspension lift, no rubbing etc. my 2lte seems to push them ok so your 1kz shold move them nicely, PM markr or icedjohnno on here, they have ikz... ones and seem to know heaps

adjusted front bump stops no more rubbing