Offroad-Express

hi ive just bought some hilux diffs leaf sprung and was wondering weather i can use the original transfer case, driveshafts and spring mounts or do none of them line up. just thought i should ask before i jump in head first.
cheers

martin

If you have a wide track the front is pretty close and if you use stock springs you just redrill the perches in a wee bit. Rear needs perches moving inwards. Flange patterns on the driveshafts are different but you can get away with transcase.

I have not done this but did a bit of searching other sites when I started mine. Then got carried away as youve seen. I think I have some links somewhere I'll have a dig.

Dan

kewl thanks for that il have a play with it all in a few weeks gota get a few other things raped up first like that trailer i started a long long time ago.cheers

martin

http://www.outerlimits4x4.com/viewtopic.php?t=42961

Link from Outers site for Lux axle conversion

Check ou the Suzuki FAQ on http://www.pirate4x4.com/forum/forumdisplay.php?f=13

Here's a few others

http://www.zukikrawlers.com/index.php

http://bbs.zuwharrie.com/content?P=90e9 ... 9789b2b&#6

Heath

thanks guys thats alot of help should make things run a little smoother (i hope:)
cheers

martin