Hydraulic winches..... info wanted

Garage talk. Anything from mounting a winch to water proofing the electrics.
Post Reply
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Hydraulic winches..... info wanted

Post by hosehustler »

Anyone using one of these or have any info?


Image

And link to the site
http://www.winch.co.nz/winches/nhw10000.html
I hate signatures
User avatar
coxsy
Hard Yaka
Posts: 5200
Joined: Tue Jun 20, 2006 12:00 pm
Location: mangere auckland

Re: Hydraulic winches..... info wanted

Post by coxsy »

apart from take the pins out of the fairlead and put in bolts , if you can rig a good pump system it'll be good :D
89 safari, pto winch, 33x15 simexs. sliders,75mm lift . turbo intercoolered
User avatar
PR
In the crap again
Posts: 1921
Joined: Mon Oct 16, 2006 12:00 pm
Location: Wellington

Re: Hydraulic winches..... info wanted

Post by PR »

what are you planing Tim :?: you dont have a truck anymore :?
Its NOT a whale !!!!!!!!!!!!!!!! more like a large seal

(021) 02388443
User avatar
hosehustler
Hard Yaka
Posts: 2051
Joined: Thu Jan 06, 2005 12:00 pm
Location: Brooklnands

Re: Hydraulic winches..... info wanted

Post by hosehustler »

PR wrote:what are you planing Tim :?: you dont have a truck at the moment


There ya go I fixed it for you Paul :wink:

I have plans :D
I hate signatures
User avatar
tallsam66
Hard Yaka
Posts: 1851
Joined: Sat Jul 01, 2006 12:00 pm
Location: Christchurch

Re: Hydraulic winches..... info wanted

Post by tallsam66 »

The only thing i could see as being a drawback is they weigh about double an electric winch.
User avatar
timotheus
Hard Yaka
Posts: 323
Joined: Sun May 13, 2007 12:00 pm
Location: Dunedin

Re: Hydraulic winches..... info wanted

Post by timotheus »

tallsam66 wrote:The only thing i could see as being a drawback is they weigh about double an electric winch.


for the coin, in my onion, you should go the 15,000pounder, cost isnt much more and the 6kg really isnt much more either.
User avatar
mercutio
Hard Yaka
Posts: 1955
Joined: Tue Jul 08, 2003 12:00 pm
Location: Wellytown

Re: Hydraulic winches..... info wanted

Post by mercutio »

tallsam66 wrote:The only thing i could see as being a drawback is they weigh about double an electric winch.


that they do but a hydraulic winch like a pto one will run all day long without overheating or needing bushes replace
my 4wd is not a truck

old mercedes never die but sometimes they do need some love

older cars are good,mercedes are better,older mercedes are the best
User avatar
DaveM
Hard Yaka
Posts: 3249
Joined: Tue Nov 02, 2004 12:00 pm
Location: Blenheim

Re: Hydraulic winches..... info wanted

Post by DaveM »

If you find a cheap way to set enough flow to run one, let me know
User avatar
mercutio
Hard Yaka
Posts: 1955
Joined: Tue Jul 08, 2003 12:00 pm
Location: Wellytown

Re: Hydraulic winches..... info wanted

Post by mercutio »

DaveM wrote:If you find a cheap way to set enough flow to run one, let me know

you just need to know someone who has a spare hydraulic pump or 5 lying around in their shed :wink: :wink:
my 4wd is not a truck

old mercedes never die but sometimes they do need some love

older cars are good,mercedes are better,older mercedes are the best
User avatar
Steve_t647
Hard Yaka
Posts: 998
Joined: Wed May 17, 2006 12:00 pm
Location: Christchurch City, In front of the computer

Re: Hydraulic winches..... info wanted

Post by Steve_t647 »

Lots of hydraulics on fire engines :wink: :) one thing the heavier the load the slower it goes but it will tow you and anything you hook up to you to wherever it is hooked up to, most dozers and heavy machinery use hydraulic but if used a lot you could want an oil cooler somewhere to not cook the oil.

I also don't think there is a brake on the winch either, well wasn't one on the old ones I was looking at for the tractor to pull stuff to the batch we were in.
Legal disclaimer: Any information I may have provided is worth exactly what you paid me for it.
User avatar
monstr
Hard Yaka
Posts: 954
Joined: Sat Nov 20, 2004 12:00 pm

Re: Hydraulic winches..... info wanted

Post by monstr »

Hi ,I dont know much about that brand but nearly all the Comp trucks out there that are running Hyd winches are useing the Superwinch ones,I dont know if they were chosen for their speed or the reliability factor but most of them are around the 300ft a min underload,,these guys have spent sh#t loads of time and money researhing this and have ironed out most of the bugs i would suggest you get hold of someone like Wayne (mudzilla) and have a talk to him about his set up.Hes running a Superwinch with a 12m rope and his motto is the "Trees the Weakest link"..Cheers
Post Reply

Return to “Tool Shed”