Page 1 of 1
Thermal Thunder Winch Challenge: working bee
Posted: Fri Oct 10, 2008 5:06 pm
by albundy
http://www.offroadexpress.co.nz/Forums/viewtopic.php?f=26&t=13175See link for details on winch challenge. We have a working bee this weekend to get the course ready. If anyone can offer any help give me a txt/call on 021925114. All picks, shovels, sledge hammers, crows bars and labour gratefully accepted.
Al
Re: Thermal Thunder Winch Challenge: working bee
Posted: Sat Oct 11, 2008 7:01 am
by Shane
do you mean today (11th/12th)or next weekend(18th/19th)for working bee?
what day sat/sun?
Shane
Re: Thermal Thunder Winch Challenge: working bee
Posted: Sat Oct 11, 2008 8:11 am
by cruzerboy
its 2day and 2moro
Re: Thermal Thunder Winch Challenge: working bee
Posted: Sat Oct 11, 2008 7:03 pm
by H2OLOVA
would have been keen to help out but a bit more notice would have been good
Re: Thermal Thunder Winch Challenge: working bee
Posted: Sat Oct 11, 2008 7:25 pm
by albundy
only found out myself late, better late then never. Heading up tomorrow morning.
Re: Thermal Thunder Winch Challenge: working bee
Posted: Sun Oct 12, 2008 4:45 pm
by Chopper01
yea I would have helped out if I knew last week some time
Re: Thermal Thunder Winch Challenge: working bee
Posted: Mon Oct 13, 2008 5:42 am
by albundy
Well just for you two we are having another day at it on labour weekend. Not sure which day will pin Rick down this week. Good course. Drove alot of it yesterday, made some new tracks. Some good arse puckering stuff in it. Should be a good weekend especially for the spectators as the area is a natural ampitheatre. It will be a godd play area to hire out at later dates and this is the plan for the area.
Al
Re: Thermal Thunder Winch Challenge: working bee
Posted: Mon Oct 13, 2008 8:02 am
by H2OLOVA
Let me know and i'll book it with the boss
Re: Thermal Thunder Winch Challenge: working bee
Posted: Wed Oct 22, 2008 4:01 pm
by albundy
Working bee day monday if you's are still interested. Probably be out there by 10ish. Take first left past the Caltex servo on your way into Hanmer. Goes over bridge and turns into a dirt road heading,( or other way round can't remember) into the hills. We will leave a vehicle near the gate on the right. I reckon it would be about 7k's from turning off to venue.
Al