Offroad-Express

Hi all.
Going to replace the old broken crown wheel and pinion in my Escudo front diff. (well the man at the garage is).
We need:
 Back lash.
 Pinion torque.
 Crown wheel bolts torque.
Also replacing bearings and seals and crush spacer.

Have just spent $25 on an online workshop manual at www.tradebit.com “ 1996-1998 SUZUKI SIDEKICK & GEO TRECKER SERVICE MANUAL” and for my wagon it is useless.
Have also done quite a bit of searching.
Any help on these specs would be great.

if the man at the garage doesnt know how to set a diff up i would be takeing it elsewhere, i put my last 2 together my self and i am no mechanics ass, i just gave mine a fraction of play and it seems to be sweet,you could ring a diff shop and ask them for the specs.
vaughan

Yeah, good advice but now its in half a million bits around at his shop. Must be able to find settings some where. Ill post this in another section, also do some more digging. Cheers.

posted stuff on other thread.

u should put a v 8 in it and stop wincing about, i have a 327 cu u culd use, jus needs work !!
w