Page 1 of 1
Transfer Bearings
Posted: Thu Nov 20, 2008 7:33 am
by 2MEKE
Does anyone have a list of bearing and seal number for an SJ410 transfer case?
Re: Transfer Bearings
Posted: Thu Nov 20, 2008 7:54 am
by UBZ
What year 410?
84+ 410 have the same transfer bearings as a 413. I can dig out my part numbers for you . cost me about $150 for all the main roller bearings and 3 seals.
Re: Transfer Bearings
Posted: Thu Nov 20, 2008 8:30 am
by 2MEKE
That would be awesome if you could.
It's an '84 (4wd switch model) so your number are most likely the right ones
Re: Transfer Bearings
Posted: Fri Nov 21, 2008 8:09 am
by UBZ
Can't find my docket but ive the part numbers off the boxes. The bearings i have are NSK brand from Japan.
http://www.nsk.comI got them from Presion Bearings in New Lynn Auckland. About $150
They are the Local NSK dealer, should be one in Whangarai.
# 6306NR*C3 703 (Large roller bearing with Circlip) x1
# 62/28C3 801 (Main Roller bearings) x 3
# 63/22C3 807 (Input shalf end roller bearing) x 1
# TC12539 (Smaller Seal, Front output i think? ) x1
# TC12545 (Larger Seal) x2
Re: Transfer Bearings
Posted: Fri Nov 21, 2008 4:15 pm
by 2MEKE
Cheers
Re: Transfer Bearings
Posted: Sun Nov 23, 2008 8:24 am
by lneil
If you have no joy with then, let me know and I'll find the Suzuki part numbers for you.