Page 1 of 1

PRado Locker wiring

Posted: Wed Jan 14, 2009 10:08 am
by madaz068
HI,
Need some help if possible. I have put a factory electric locker into my Prado (LJ71). I cant figure out where the wiring goes.

If anyone can PLEASE take some pics of one that has the locker so i can figure it out.

Thanks and ill owe you a couple of beers next time :D :D :D

Re: PRado Locker wiring

Posted: Wed Jan 14, 2009 10:56 am
by Dace
madaz068 wrote:HI,
Need some help if possible. I have put a factory electric locker into my Prado (LJ71). I cant figure out where the wiring goes.

If anyone can PLEASE take some pics of one that has the locker so i can figure it out.

Thanks and ill owe you a couple of beers next time :D :D :D


Send Taz a pm, he has used wire to lock his diff before, I think it was Migwire :P

Re: PRado Locker wiring

Posted: Thu Jan 15, 2009 9:54 pm
by mudmike
You will need to see how much factory loom is there, mine had the plug for the computer in passenger foot well, but the wires stopped at the plug by the fuse box in the divers foot well. I ran my own from there to the diff. I used the wire info off the web for the tecoma and other toyotas, was much the same. If factory loom is there it should come out rear right with the adjustable shock wires. hope this helps. Just finished mine and have it working fine.
Good luck :D

Re: PRado Locker wiring

Posted: Thu Jan 15, 2009 10:14 pm
by Jerry
sadam has a good toyota manual with all that wiring info, you may want to pm him

Re: PRado Locker wiring

Posted: Fri Jan 16, 2009 7:55 am
by madaz068
mudmike wrote:You will need to see how much factory loom is there, mine had the plug for the computer in passenger foot well, but the wires stopped at the plug by the fuse box in the divers foot well. I ran my own from there to the diff. I used the wire info off the web for the tecoma and other toyotas, was much the same. If factory loom is there it should come out rear right with the adjustable shock wires. hope this helps. Just finished mine and have it working fine.
Good luck :D



THanks for your help Mike. I spent lots of time under the vehicle yesterday and tried to figure out where the wiring goes. Because i have removed the factory shocks i did see the wiring for the shocks and thought that maybe it was meant to be there. Bugger mine mustnt have the wiring for the locker. Oh well back to the drawing board.

Re: PRado Locker wiring

Posted: Fri Jan 16, 2009 11:51 am
by vvega
3 wires ?
12v earth trigger on earth trigger off ? just put a toggle switch on it :D

Re: PRado Locker wiring

Posted: Fri Jan 16, 2009 2:33 pm
by madaz068
vvega wrote:3 wires ?
12v earth trigger on earth trigger off ? just put a toggle switch on it :D


Try 24 wires i think

Re: PRado Locker wiring

Posted: Fri Jan 16, 2009 3:23 pm
by vvega