Page 1 of 1
anyone have one
Posted: Mon Mar 30, 2009 9:05 am
by Windsurfer0206
its from a 3ye need the part that bolts ont to top of water pump has the 3 sensors in it and the hose going to radiator. need the whole unit pointed in green. can see 2 sensor plugs pointed in red
chris
Re: anyone have one
Posted: Mon Mar 30, 2009 1:07 pm
by Steve_t647
You may get away with the normal 3y one and chop the rad hose and put a stainless section with a fitting in for the other sensor, one more place to leak but if you get a lip put on the end's of the pipe (or 3 - bits of weld) you can clamp the hose and it will not come off.
Re: anyone have one
Posted: Mon Mar 30, 2009 3:46 pm
by Windsurfer0206
i dont have the sensors just the plugs on the loom. looking to see if anyone has a dead 3y-e with this piece still there so i can just unbolt mine and bolt the new one in. think it has 3 sensors in it. there the last three sensors i need before it is all complete.
anyone has it let me know
Re: anyone have one
Posted: Wed Apr 01, 2009 4:59 pm
by blulux
hello
iv got one with no sensors off a 4y, if you send a detail pic of the plugs i might have the sensors and could mount them to the 4y one if you want?
scott
0211203155
scott.surfworks@hotmail.com
Re: anyone have one
Posted: Thu Apr 02, 2009 7:54 am
by Windsurfer0206
hey cheers for that. found one from a wrecker yeasterday aft in christchurch with sensors shipped to auck for 50 plus gst. so now just have to put transfercase onto gearbox and put gearbox in car wait for that part to arrive and try and start her up.
thanks for the offer anyways.
chris