Offroad-Express

Hope this is the right place to ask this.

I have a holden v6 and auto in my lux. I am rewireing it (i did not do the original install).

There are three wires that run to the auto. I cant figure it out from the diagram I have.
I assume they are something to do with temp sensing (for the torque converter lock up) and the solenoid for the lock up.

I am not using a VSS so my lock up wont work. Do I still need these wires?

Can I use some of these wires to trigger a cooling fan for my trans cooler (or even just to run a trans temp gauge)?

Cheers.

Arron.

dunno if im right but the t700s have 3 wires for the speedo in the commodore

Yes, correct, but I believe that those three wires come out of the tail housing where the Vehicle Speed Sensor is. I dont have a tail housing as I have a lux transfere case instead. The three wires Im talking about come out about haflfway down the left side.

Cheers.