Page 1 of 1
Using air con for compressor in fj40
Posted: Sat May 16, 2009 9:00 pm
by jear bear
Hi, can any1 help, My mate wants to use a air con pump as a compressor in his fj40... what is best way to run it? because not really to keen to run waterpump, alternator and air con off 1 belt from the crank. but cant seem to find a twin crank pulley..has any1 done this conversion and tell us the best way to go about it. thanks guys
Re: Using air con for compressor in fj40
Posted: Sat May 16, 2009 9:41 pm
by coxsy
James here, The 40 I got off Curly has had that done.
This is the only picture of the engine bay I have unfortantly, But the aircon pump can be seen behind the battery and Washer bottle.
I'll try and get a better picture tomorrow If no one else get's here before then.
Re: Using air con for compressor in fj40
Posted: Sat May 16, 2009 9:49 pm
by arkfj40
HI, Im the mate with the 40 trying to do the aircon thing.
would be good to see how its hooked up and mounted. Thanks for your help
Re: Using air con for compressor in fj40
Posted: Sat May 16, 2009 11:46 pm
by jear bear
Can you tell me if they were all running off the same belt??? It looks like there is just the 1 belt in the photo. thanks
Re: Using air con for compressor in fj40
Posted: Sat May 16, 2009 11:55 pm
by Sadam_Husain
The 3f motors came out with twin belt pullys
Re: Using air con for compressor in fj40
Posted: Sun May 17, 2009 8:21 am
by coxsy
will do so as he wakes up travels 12km to where the truck is takes photos and return back here tonight some time
his dad
Re: Using air con for compressor in fj40
Posted: Sun May 17, 2009 4:43 pm
by coxsy
TWO VIEWS FROM THE TOP OF THE ENGINE
Re: Using air con for compressor in fj40
Posted: Sun May 17, 2009 8:07 pm
by jear bear
thanks heaps for that...making a bit of sense now!