Offroad-Express

this weekend remounted the winch on the 40, the rear tow bar and the pto drive on the transfer box ,replaced broken sidelight on safari and the prs aerial and have these waiting to be fitted monday

I'm guessing you mean November not October?

Went to Palmerston North and visited Badnuz aka Ewwen



Tried to find the Ashurst river but just got myself lost so went back to town and picked up new engine and gearbox etc for the zook

them is big tahs MRo.....

yeah that looks awesome!

Are those the same wheels that 4wdbits are selling now?

got my alternator in and all working,fixed all my blown light bulbs in the 60 and washed it, got me an 80 series rear axel for my ute 70,did oil and filter and air filter clean on the 60 aswell shes running sweeet now,just gota replace a ball joint and the cardinal uj on the ute so i can use it this weekend

Nice 80".. Is that Badnuz ? or MrO's ? ... Looks good on big Tah's .. Jafa educated me on the difference between Tires, Tyres, And Tah's while up here last week.. ...

mudzilla wrote:Nice 80".. Is that Badnuz ? or MrO's ? ... Looks good on big Tah's .. Jafa educated me on the difference between Tires, Tyres, And Tah's while up here last week.. ...

Badnuz's one is still recovering from open heart surgery

took the mistress out for a play today ...she went really well, at times out performing a locked and lifted Bighorn of my mate's. gave it a good thrashing to iron anybugs out of her.




heres the Mrs having a go thru the mud ... took a promise of a diamond ring "Yeah right" to get her out of the drivers seat




http://www.offroadexpress.co.nz/video/first-test-mistress
short video of the Mistress

mudzilla wrote:Nice 80".. Is that Badnuz ? or MrO's ? ... Looks good on big Tah's .. Jafa educated me on the difference between Tires, Tyres, And Tah's while up here last week.. ...

Cheers, yea tis mine haha the ol "tah's", flip must try find that thread it was hilarious

flyingbrick they are the ones 4x4bits is selling. There just the speedy brand there the 16x10" alloy and have a 1400kg weight rating on them i dont think you'd ever break one not that my road truck goes offroad and 315/75-16 maxxis bighorns because thats the bigest cheapest tyre i could find

mroffroader wrote:

mudzilla wrote:Nice 80".. Is that Badnuz ? or MrO's ? ... Looks good on big Tah's .. Jafa educated me on the difference between Tires, Tyres, And Tah's while up here last week.. ...

Cheers, yea tis mine haha the ol "tah's", flip must try find that thread it was hilarious

flyingbrick they are the ones 4x4bits is selling. There just the speedy brand there the 16x10" alloy and have a 1400kg weight rating on them i dont think you'd ever break one not that my road truck goes offroad and 315/75-16 maxxis bighorns because thats the bigest cheapest tyre i could find

Man they look good. Maybe I should get a set rather than the steels.

flyingbrick wrote:Man they look good. Maybe I should get a set rather than the steels.

Yea there pretty choice, -50 offset so they hang out the guards a bit I don't personally like 16's because the tyres are always a bit more expensive as 15's are so much more common but didn't have a choice as I have the big brakes on the 80


THE TAH"S THREAD LOL
http://www.offroadexpress.co.nz/Forums/ ... =38&t=6440

Swapped the passenger door I smashed up in the Reefton Challenge with a better one, best part of the truck, had to swap all the internals over. Panel beated the guard while I had it off. Now just gotta do the driver's side as well.
Al

haynzy wrote:

mudzilla wrote:Nice 80".. Is that Badnuz ? or MrO's ? ... Looks good on big Tah's .. Jafa educated me on the difference between Tires, Tyres, And Tah's while up here last week.. ...

Badnuz's one is still recovering from open heart surgery

maybe this week it will be going.....

Let see, swapped out both front discs, very rusted, replaced idler arm and both shocks.Took me over 2 hrs to swap out the driver side disc , couldn't figure out how to get the snap ring back on because the groove was recessed back into the auto hub. Tried putting it into 4x4, no go . Read posts that I thought might help but nothing . Sat down looking at the situation while drinking a beer and then it hit me , grab the axle and pull , Pass side took me 30 min including the idler arm. Pass side auto hub was in 4 pieces, 3x4

Changed out the manual trans fluid, when I pulled the fill plug first to make sure I could fill it before drainining, fluid drained out for about 3-4 min . Fluid looked old but no sign of water. How do you over fill a trans Refilled with ATF and now the syncros are sweet.

Rebuilt the gear side of my new(used) Warn 9500, totally solid, wished I had a solvent tank . After everything freed and well greased, looked at the motor side, anyone recommend a motor rebuilder in the area?

Time for more beer

well meet up with suzuki1k on sat and went for a roam down ashurst river had alot of fun done a few big river crossings dam river still pritty deep gave the suzuki a good work out snorkles and trees dont mix as i found out bloody good day cheers suzuki1k

went out to paraparaumu on sat and met up with a mate was dicking around at the beach carpark and decided id try a little flexing. as i havent ever since i got the vx lifted.

As i thought my rearwheels just touch the inner guard. dam offset wheels oh well. was maxed out to the bumpstop too soo on the next modlist is some rear bumpstop adjustment.

otherwise had a goodday out.

Spotted Malfunctions jeep too heading past silverstream mcdonalds when i was in there dam it sounded mean!

[..

got my ass into gear and pulled the old motor out of my 70 pos ready for the recon'd jobbie ...

broke an engine mount if anyone has a spare ??????

well with only a week to go till the Taupo WC i thought i better make sure the old girl goes so stoked the fires and went for a drive thru to Ham, did a lap of the main, visited my mum,called into see Pete, had a gander at what he was up to(hope you got it sorted bro ) then drove home...seemed to run ok so put it back in the garage and hope it goes in 4 days time

broke an engine mount if anyone has a spare ??????


i think Ski was wrecking a diesel 70.
pm him he may have a engine mount.

VVega did a pretty good job on the diff I bought off him for the locker in it










pity the drums in were a touch smaller than whats in my surf, but oh well.

to the diff's away getting swapped, and i`m redoing all the drum setup at the mo.

Spent the weekend geting ready for the Taupo Winch challenge.

That pretty much involved putting some silicone tyre shine on the tyres, sticking some new stickers on the doors and giving it a rev



Big thank you to everyone that helped out to make it happen, and especially Sarah for driving to Palmy and back in 1 day

Stickers look awesome, and work really well, especially with the green back ground, it really make's them stand out

It's kinda like putting a "Type R" sticker on a Integra

took my cousins for there first 4x4 trip crashing thru gorse over a ridge line thru a swamp up a river themn a bit of winching to get bak up onto thr trail to find a large tree over the track and well they are hooked and cant wait to go again spent all day monday fixing the dammage

Sweet pete!! the second green zook to have the new arb airlocker sticker i know of on it

yours is heaps sexier tho bro and it has ummm 2 stickers not 1

mroffroader wrote:Sweet pete!! the second green zook to have the new arb airlocker sticker i know of on it

yours is heaps sexier tho bro and it has ummm 2 stickers not 1

Yea I drove a long way for some rad stickers

DieselBoy wrote:Spent the weekend geting ready for the Taupo Winch challenge.

That pretty much involved putting some silicone tyre shine on the tyres, sticking some new stickers on the doors and giving it a rev

Big thank you to everyone that helped out to make it happen, and especially Sarah for driving to Palmy and back in 1 day

Stickers look awesome, and work really well, especially with the green back ground, it really make's them stand out

It's kinda like putting a "Type R" sticker on a Integra

Damn dude how do you always get your trucks looking so bling after you pile it up with mud. Looking mean.

Was planning on watching the taupo winch challenge. stupid work

[quote="sprey"]went out to paraparaumu on sat and met up with a mate was dicking around at the beach carpark and decided id try a little flexing. as i havent ever since i got the vx lifted.

As i thought my rearwheels just touch the inner guard. dam offset wheels oh well. was maxed out to the bumpstop too soo on the next modlist is some rear bumpstop adjustment.

otherwise had a goodday out.

Spotted Malfunctions jeep too heading past silverstream mcdonalds when i was in there dam it sounded mean!/[quote]


Hahah thanks for that mate
Well wasnt quite the weekend but on friday i decided to see if the jeep flexed. A few photos here if you want too look
http://www.offroadexpress.co.nz/gallery ... tions-jeep

Satalite wrote:

mroffroader wrote:Sweet pete!! the second green zook to have the new arb airlocker sticker i know of on it

yours is heaps sexier tho bro and it has ummm 2 stickers not 1

Yea I drove a long way for some rad stickers

I KNEW YOU FORGOT SOMETHING!! THE BLUE BOXES!!!!!!!

Not really all about the weekend but a few photo's of the finished bar work and also the trip to Ashhurst..




What happens when you arn't paying attention...



Went to the stock cars on Saturday night and they dropped a car from over 120 foot, when it hit the other cars on the ground there was an explosion, I managed to click right at the time it hit and this is the result

Rest of the photo's are HERE Video is HERE

suzuki1k wrote:Not really all about the weekend but a few photo's of the finished bar work and also the trip to Ashhurst..




What happens when you arn't paying attention...

Went to the stock cars on Saturday night and they dropped a car from over 120 foot, when it hit the other cars on the ground there was an explosion, I managed to click right at the time it hit and this is the result

Rest of the photo's are HERE Video is HERE

Bar work looks awesome!~