Page 1 of 1
Front springs
Posted: Mon Nov 09, 2009 10:25 pm
by long
Im looking for some front springs out of a JGC with the following mesurements.
They have just under 8.5 coils.
The springs are just over 17" long.
The wire is .54 to .55 inches in diameter
OD of spring is about 5.25", ID is about 4.00".
Sorry about the imperial mesurements i will come back n change to Metric soon.
Apparently they come out of a 1993-1997 Jeep Grand Cherokee.
I am use sure about the Jeep Cherokee so im hopeing some who owns one can let me know.
Re: Front springs
Posted: Tue Nov 10, 2009 8:18 pm
by xj
Theres some ZJ's wrecking on TM at the moment i believe. The XJ front springs are the same diamter etc as the ZJ, but are 2 to 2.5 inches shorter, so wont be much good to ya.
Re: Front springs
Posted: Wed Nov 11, 2009 10:06 am
by long
Thanks for that XJ but i do need the ones out of a JGC or a JC other wise what i i want to do with them wont work
Re: Front springs
Posted: Wed Nov 11, 2009 11:28 am
by xj
long wrote:Thanks for that XJ but i do need the ones out of a JGC or a JC other wise what i i want to do with them wont work
The ZJ I refer to is what you have asked for (JGC), and i was assuming the "JC/Jeep Cherokee" you refer to is the Jeep Cherokee of the same years, which would be the XJ
So to use your teminology, the JGC (ZJ) front springs are approx 2.5 inches longer than the Jeep Cherokee/JC (XJ) front springs. The overall diameters of the coils are the same on both vehicles.
[edit]
Aannndddddddddd, i think i may still have these out in my shed someplace:


Which i "think" are the ZJ, JGC ones that youre asking about
If they are the right ones, and if i do still have em, sort the freight and theyre yours.
ill see if i can dig em out tonight.
Re: Front springs
Posted: Wed Nov 11, 2009 2:15 pm
by long
That would be great if you do have them there no probs with freight etc
Re: Front springs
Posted: Wed Nov 11, 2009 2:44 pm
by xj
Dug some out, dont think theyre the same ones that are in the previous pic (got a feeling they were donated for someones 2 inch lift

), but here's some dimensions anyway:
Length = 430mm (16.92inches)
Steel Diameter = 15mm (0.59inches)
Outside diameter = 130mm (5.18inches)
Do you have an email address I can send the pic too? Cant be arsed doing the photobucket thing and then posting them to here.
Cheers
Re: Front springs
Posted: Wed Nov 11, 2009 4:22 pm
by xj
You have mail sir
Re: Front springs
Posted: Fri Nov 20, 2009 8:52 am
by DAJEEP
if he doesnt want them ill take them off your hands
Re: Front springs
Posted: Fri Nov 20, 2009 11:47 am
by xj
sorry mate, already promised. Just waiting for the ORE express to pick em up from me.
Re: Front springs
Posted: Fri Nov 20, 2009 12:13 pm
by DAJEEP
sweet as
Re: Front springs
Posted: Mon Nov 23, 2009 8:20 pm
by xj
Long, the ORE courier service will be heading back your way from Hams on Sunday. Ill keep ya posted
Re: Front springs
Posted: Tue Nov 24, 2009 12:21 pm
by long
Great ty i wont be home untill tuesday going away for sun to mon if courrier wants he can txt on that number i gave you and i will go to his place and pick them up.
Re: Front springs
Posted: Tue Nov 24, 2009 12:52 pm
by xj
done, hes about 200mtrs away from himutangi beach, im sure you can find an excuse to go down there!
Re: Front springs
Posted: Tue Nov 24, 2009 1:13 pm
by long
You got that rite my excause is owning a 4x4 and two surf casting rods and lots of bait

Re: Front springs
Posted: Tue Nov 24, 2009 5:59 pm
by xj
you will get on well!
Re: Front springs
Posted: Sat Nov 28, 2009 8:51 pm
by xj
theyre in the back of dixies waka now mate. Hes leaving here tomorrow arvo heading back your way. Hes got ur number.
Re: Front springs
Posted: Sun Nov 29, 2009 9:58 pm
by long
Great no worrys at all looking forward 2 meeting up with him once again tnx for the help