Page 1 of 1
G16A around 1990-91, 16 valve engine wanted
Posted: Fri Nov 13, 2009 3:10 pm
by Jungle
Hello.
In Rotorua, looking for a replacement engine for a 1990 zuk.
Does anyone have one of these engines in good condition.
Cheers
Jungle
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Fri Nov 13, 2009 6:09 pm
by ToyRover
yeah i have one in good nick how much ya offering?
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Mon Nov 16, 2009 12:26 pm
by Jungle
Holy hell. That was quick.
Will just check with the owner of the zuk. Is it still in vehicle or ready to transport?
Cheers
Jungle
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Mon Nov 16, 2009 2:53 pm
by ToyRover
in it so ppl can hear it running but i can get it out in a afternoon
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Thu Nov 19, 2009 8:57 am
by Jungle
The latest update.....
Rod's gonna have a go at using some metal compound to relocate the key. He read about it on another suzuki forum.
Any hints or suggestion on the likelihood of this working. I've done it with a Prado 2LT crank pulley and had great success.
Will let you know after the weekend if the engine is still needed.
Cheers
Jungle
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Thu Nov 19, 2009 4:08 pm
by Heath
Have heard of that option as the keyways flog out. Have also heard of putting a bigger key way in at 180 degrees (in both pulley and crank) so you have fresh steel to play with.
Re: G16A around 1990-91, 16 valve engine wanted
Posted: Thu Dec 03, 2009 9:16 am
by Jungle
Latest update.
A mate came over from Tauranga and used a mig to partially fill the key way and a compound to do the rest. The zuk is driving around now. Fingers crossed.
Will pass on the engine. Thanks for the offer ToyRover.
Cheers
Jungle